Lateral-g Forums
Page 10 of 13 « First 89 10 1112 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Unreal 1967 Mustang (https://www.lateral-g.net/forums/showthread.php?t=37578)

jarhead 10-07-2015 03:01 PM
Quote:
Originally Posted by GPR (Post 618581)
The body was not ecoated so we sanded it down a long time ago and sprayed black epoxy on the undercarriage. SPI came out with red oxide and that is what the owner wanted so after seam sealing it was sprayed with red oxide. The owner wanted the Lizard Skin and he wanted the undercarriage finished in red oxide.
What do you do to the inside of doors for sound deadening?

Thanks, Joe

GPR 10-08-2015 08:32 AM
Quote:
Originally Posted by jarhead (Post 618586)
What do you do to the inside of doors for sound deadening?

Thanks, Joe
We are going to attempt to spray Lizard Skin

no go nova 10-08-2015 09:33 AM
You guys are doing great work and fixing this body to be a perfect car.

jarhead 10-08-2015 12:51 PM
Quote:
Originally Posted by GPR (Post 618664)
We are going to attempt to spray Lizard Skin
Thanks Rusty, looking forward to more pictures. I really enjoy you and your sons work.

GPR 10-08-2015 02:18 PM
Inside the trunk painted Acapulco blue

http://img.photobucket.com/albums/v3...psgxsakyxl.jpg

Chassisworks 10-08-2015 03:41 PM
Hey Acapulco! Shiny blue trunk lookin' warm and friendly... That's how it goes, right?

Lookin' good, Rusty!

GPR 10-22-2015 10:44 AM
The back of the fenders were epoxy primed followed with a couple of coats of Lizard Skin

http://img.photobucket.com/albums/v3...psoadahpni.jpg

Waited a few days and sprayed SPI red oxide

http://img.photobucket.com/albums/v3...ps6funaaqm.jpg

Engine compartment and the body was taped getting ready for Lizard Skin on the fender aprons

http://img.photobucket.com/albums/v3...psygzz1hpz.jpg

http://img.photobucket.com/albums/v3...psz4cb20x4.jpg

SPI black epoxy

http://img.photobucket.com/albums/v3...pszkxrqgdf.jpg

GPR 11-12-2015 02:31 PM
While the owner is busy making his own fuel and brake lines while it is on the rotisserie we painted a few parts

http://img.photobucket.com/albums/v3...pswwmdjsdv.jpg

http://img.photobucket.com/albums/v3...psjietd3k3.jpg

http://img.photobucket.com/albums/v3...psvve5gxwe.jpg

GPR 11-21-2015 01:41 PM
The owner did a great job fabricating and installing the fuel and brake lines

http://img.photobucket.com/albums/v3...psnn2yms22.jpg

http://img.photobucket.com/albums/v3...pst4lkpywy.jpg

http://img.photobucket.com/albums/v3...psdwyzbmlh.jpg

http://img.photobucket.com/albums/v3...psjgqmlmsx.jpg

http://img.photobucket.com/albums/v3...pscfuvaown.jpg

http://img.photobucket.com/albums/v3...psvnlqplhl.jpg

GPR 12-28-2015 04:12 PM
Today I sprayed two coats of SPI epoxy on the body and it is almost ready for paint just need to block sand windshield posts and prime again

http://img.photobucket.com/albums/v3...psilhgyzje.jpg

http://img.photobucket.com/albums/v3...ps6jigivni.jpg

http://img.photobucket.com/albums/v3...psyyyaangm.jpg


All times are GMT -5. The time now is 07:35 AM.
Page 10 of 13 « First 89 10 1112 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net