Lateral-g Forums
Page 10 of 27 « First 89 10 111220 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   66 Chevelle LS7 Protouring in Sweden (https://www.lateral-g.net/forums/showthread.php?t=53150)

warhawkchevelle 09-14-2018 08:45 AM
http://i88.photobucket.com/albums/k1...C58B3C69FC.jpg

All hoses and Clamps are finally in place, now I can book time for inspection of the build for my registration as a modified vehicle.

That has to get approved before I can mount body again.

1965_SS 09-15-2018 11:09 PM
Quote:
Originally Posted by warhawkchevelle (Post 683365)
http://i88.photobucket.com/albums/k1...BF77EFBB77.jpg

Slow progress, its a lot of planning to remember all parts when ordering from your country and getting it to Sweden :whistling:

The axle and brakes are finally assembled and I will measure and order braided brakehoses tomorrow.

Im getting it registered as a modified vehicle so I need to get a build inspection Done before I can mount body also.

Regarding venting of rear axle, I have AN3 male barb on housing.
Any ideas for filter or roll over valve or What have you used?

Looks great! You can check out this for a vent: https://www.iimuch.com/

TheWraith 09-17-2018 07:15 PM
Looks great and way to improve after a setback.

warhawkchevelle 09-28-2018 10:41 AM
http://i88.photobucket.com/albums/k1...D34D3B4B_1.jpg

We have touchdown! 😁😁😁

Frontclip goes on tomorrow!

warhawkchevelle 09-30-2018 08:35 AM
http://i88.photobucket.com/albums/k1...C99777C02E.jpg

Now the car is back at home.
Next step is to rewire the car with the American Autowire kit and do the wiring for my Fueltech FT500 EFI system

warhawkchevelle 10-04-2018 10:53 AM
http://i88.photobucket.com/albums/k1...70134BDDF0.jpg

Ron Davis radiator fits and looks really good :excited:

http://i88.photobucket.com/albums/k1...71437803C6.jpg

http://i88.photobucket.com/albums/k1...B5189FBB64.jpg

Had a radio delete panel so thats where the FT500 dash/ECU will dit. Gotta get it chromed and painted also before I install.

A buddy left his Drag Week Corvette in USA so he is flying over in november and upgrading it so he’s bringing home a Dakota Digital RTX for me.

WSSix 10-04-2018 04:26 PM
Congrats! That's quite the accomplishment. The car is looking good! Hope you have a productive winter this year finishing the car.

warhawkchevelle 10-04-2018 10:11 PM
1 Attachment(s)
Thank you!
We`ll see if I have enough time, energy and money to finish it this winter.
Waiting on a new sled also, hoping for a lot of deep snow and steep hills this winter also :thumbsup:

warhawkchevelle 10-13-2018 01:16 PM
http://i88.photobucket.com/albums/k1...4DF42F676F.jpg

Me and a buddy started to design supercharger brackets tonight. He is drawing it up in Solidworks so we can do a first mockup.

warhawkchevelle 11-09-2018 10:45 PM
Had to redo my transmission tunnel, didnt get good angles so I lifted the Tremec in the rear.

http://i88.photobucket.com/albums/k1...DB519D56_1.jpg

Trailerhitch in place :D

http://i88.photobucket.com/albums/k1...AB5C241744.jpg

New sled is here ❤️
http://i88.photobucket.com/albums/k1...1F129EEA4F.jpg


All times are GMT -7. The time now is 11:21 PM.
Page 10 of 27 « First 89 10 111220 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net