Lateral-g Forums - 1967 Camaro Build

Page 10 of 21

« First

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 1967 Camaro Build - Houston, Texas (https://www.lateral-g.net/forums/showthread.php?t=56664)

Brianstanford

10-12-2018 03:50 AM

Quote:

Originally Posted by Jimmy Sean (Post 684844)

Not sure I'd do that, wouldn't it heat soak and then take longer to cool? The heat reflective tape, the gold or silver work better at reflecting the heat?

i was thinking about the gold or silver tape, wish it came in black

Ricochet

10-16-2018 12:09 PM

Great looking build Brian! You've through quite a bit of life's trials and tribulations during this process. Enjoyed reading your thread. Way to keep at it!

Brianstanford

10-19-2018 12:06 AM

Looking for help on the radiator hoses

griffin rad with in and out on same side
corvette ls2 motor

any suggestions is appreciated

dhutton

10-19-2018 04:51 AM

Quote:

Originally Posted by Brianstanford (Post 685090)

Looking for help on the radiator hoses

griffin rad with in and out on same side
corvette ls2 motor

any suggestions is appreciated

Lower hose ACDelco 24403L trim to fit.

Upper hose pretty sure a section of this will work. Gates 22358

Don

Gmachine1911

10-20-2018 06:28 PM

Quote:

Originally Posted by Brianstanford (Post 685090)

Looking for help on the radiator hoses

griffin rad with in and out on same side
corvette ls2 motor

any suggestions is appreciated

I went with a couple from NAPA. Looks like your radiator layout is really similar to mine. I've got part numbers and pics posted on page 11 of my build thread if it helps...Nice project, btw, been following along!

Brianstanford

10-22-2018 03:05 AM

Thanks guys!

Brianstanford

10-25-2018 03:26 PM

2 Attachment(s)

Upper and lower radiator hoses. Both had to be cut a little to fit

Brianstanford

10-25-2018 03:27 PM

1 Attachment(s)

Tipton clutch master cylinder reservoir

glassman

10-25-2018 04:30 PM

Quote:

Originally Posted by Brianstanford (Post 684866)

i was thinking about the gold or silver tape, wish it came in black

I used self etching primer on mine. Then rattle canned it matte black. Both sourced from a body shop paint supplier.

https://lateral-g.net/forums/showthr...assman&page=48

post#472

rickpaw

10-26-2018 08:05 AM

You're making great progress. Looking forward to seeing it in person.

All times are GMT -7. The time now is 04:35 AM.

Page 10 of 21

« First

Last »

Show 40 post(s) from this thread on one page