Jeff the car looks awesome great job!!! I couldn't agree with you more about Jeff Duponts Camaro. That thing was over the top!!!!!!! My kind of car build for sure!

Steve how's the paint coming along?

Car is edged and starting to reassemble for final paint. Getting close!!! Jeff u heading to Columbus good guys this summer? Im gonna be there for sure.

Looking good! I like the color combo. Ive been kicking around red with Z stripes for my new project car as well.

When are you hoping to have it completed?

sounds good on your car Steve,Definitely going to Columbus,give me a call when you get there(304)546-8590

Slow very slow:( I'm working on getting all of my motor stuff all together (purchased) but it could be worse. I could be back at square one looking for a car. Taking my time I think is the best:EmoteClueless:
Again beautiful car man! Great inspiration for me to get going on mine.

thanks Paul,gotta a lot of respect for you guys work,very nice.Your 67 Nova was one of the best at Columbus last year.I am starting back on mine tomorrow after about 6 months off,busy at work and trying to start a build for a friend.I was shooting for Columbus but now it looks like later in the summer.Thats Tornado Red from a new VW on mine,I like red on first and second gen Camaros.If your new car is half as nice as the nova I cant wait to see it.Chris Kinkers 69 Camaro looks awesome that your doing.

keep updates coming,your doing great on your car

finally got a few updates,installed a DSE roll bar,relocated battery to trunk and waiting for my DSE Optima battery mount.Bought a set of Nu-Relic power windows(very nice product)trying to get ready to finish up the paint work to start buffing soon.Put in a set of Clayton Machine Works pedals(also very nice)Bought a set of kick panels and package tray from Clint @ The Shop LLC. and he was nice enough to ship me the package tray and let me work around the roll bar and then he will wrap it for me. http://i1192.photobucket.com/albums/...ps1b2fa31d.jpghttp://i1192.photobucket.com/albums/...ps7c980640.jpghttp://i1192.photobucket.com/albums/...ps2f90d798.jpghttp://i1192.photobucket.com/albums/...ps8ad11a28.jpghttp://i1192.photobucket.com/albums/...ps983c321e.jpghttp://i1192.photobucket.com/albums/...psae119dfe.jpghttp://i1192.photobucket.com/albums/...psdbea7a2b.jpghttp://i1192.photobucket.com/albums/...psb3562c1d.jpg

Good job Jeff.
Making some good progress. Keep us posted.

Hey Jeff the car looks outstanding!!!! And ya for sure I will give you a call at Good guys to meet up. Keep up the great work!!!!!
Steve

Thanks guys,finally got some time to work.

Nice progress Jeff. :thumbsup:

Patterning the build after Jay's style; http://www.autobspec.com/ ...that's #winning. :unibrow:

I agree! Looks like a pro shop build :thumbsup:

It looks great.

Man that's one clean build Jeff, look great.

Thanks Skip,I like everything Jay has done on his and Jeff's car,I have seen Jeff's car in person and the quality is over the top
Thanks Ron,I am slow but I think I know what I want when it's done
Thanks Waynie
Thanks Lenie,are you getting to enjoy your car any yet?

The car looks great. How difficult was it to install the DSE roll bar? I'm about to pull the trigger on one.

Thanks.

Looking great. Excellent work.

Jeff that package tray is awesome!

Thanks Mario,Clint @ The Shp LLC makes them and that's what I am doing right now is trying to fit it around the roll bar and then send it back to be covered,his products are great,I bought a set of kick panels also and they are the best I have seen so far.He is starting to work on some door panels for the camaros.

What gas pedal is that? I see the Clayton Machine brake/clutch (awesome) but the pedal looks the same.

Thanks,
William

Will that is a Clayton standard gas pedal bolted to a cutoff drive by wire pedal,I used a Pontiac Grand Prix pedal and cutoff about 90% of it and drill and bolt it up!if you need a closer pic let me know!Jay Doerfler told me that's how he did it on Jeff Duponts car,so I can't take credit for it.

Sweet build Jeff!,

Thanks,I have been following along with yours

heres a few pics of a new tilt column I just got from Jim @[email protected] he moved the high beam switch to the signal switch which cleans up the floor area,his service and quality is great if anyone needs a columnhttp://i1192.photobucket.com/albums/...ps36bd4b23.jpghttp://i1192.photobucket.com/albums/...ps8e6ca7fb.jpghttp://i1192.photobucket.com/albums/...ps924906bf.jpg

Thanks a lot...just got a full blown case of those Jeff/Jay dudes '69 Camaro envy. :shakehead:


lol

What kind of gauge cluster is that?

The gauge cluster is a Thunder Road with 5" inch Autometer Sport Comp gauges,got it from Matt & Kim @ Matts Classic Bow ties

Looks killer Jeff.
Keep up the good work bud!

Very nice Jeff.

Thanks guys,Waynie we needs som updates.

Hey , great looking car Jeff, where did you get the grommet to seal loom as it passes thru trans tunnel , I need one to suit my loom on the Elcamino.

Cheers
John

John the grommet came from Jegs,I had to slice to get all the plugs to go thru it then screwed in,it's a 2.5" that's the biggest I could find.

John,

It's a company called Seals it. They make all kinds of different size pass thru grommets. Google them! Summit and Jegs sell them.

Installed an Optima polished battery mount in the trunk that I just got from DSE,it's very nice even though my pics don't show very well[URL=http://s1192.photobucket

just read almost every page, beautiful build with alot of taste. Like Jay's this one is a top 5 '69 Camaro for me. Nice work Jeff

thank you Chris,believe me I am a big fan of your work,the 67 Nova you just built is one of my all time favorites:thumbsup:

I am sorry I missed this question,the roll bar was not too hard at all,DSE does a real good job making there products.

Finally got a little work done,Got the shell sanded and buffed after a couple days sanding over and over from 800 to 5000 grit.Really satisfied so far but these pics from Ipad don't show too well.Also tried my package tray that I bought from Clint @ The Shop,very nice work and once the glass is in I don't think it will show much at all where I cut it and Clint wrapped it to fit around the rollbar.http://i1192.photobucket.com/albums/...ps968b1379.jpghttp://i1192.photobucket.com/albums/...psa23d536f.jpghttp://i1192.photobucket.com/albums/...ps8acff7b2.jpghttp://i1192.photobucket.com/albums/...psb6eaaa29.jpghttp://i1192.photobucket.com/albums/...psa5229e9b.jpghttp://i1192.photobucket.com/albums/...psc7386639.jpghttp://i1192.photobucket.com/albums/...ps99a38756.jpghttp://i1192.photobucket.com/albums/...psa1b35ec9.jpg