Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project FNQUIK (https://www.lateral-g.net/forums/showthread.php?t=17217)

GregWeld 08-03-2016 10:40 AM

There ya go Wayne!!!


Better hurry up though - 'cause I want to see this bad boy running and driving!

waynieZ 08-03-2016 12:26 PM

Thanks Greg.
If good thoghts and prayers for you work you will!

lsuguy 08-03-2016 12:33 PM

Nice progress Wayne!

waynieZ 08-03-2016 09:41 PM

Thanks Derek!
I got a little more done today ground the welds down on the frame and preped it for paint. I used self etching primer and will spray the Black tomorrow.

First coat
http://i172.photobucket.com/albums/w...psyecvtdob.jpg

I ended up putting 4 coats, Ill sand it and spray the rest tomorrow.

http://i172.photobucket.com/albums/w...psjbi6cqr7.jpg

Then move on!!

waynieZ 08-04-2016 07:16 PM

Today we got the frame notch sprayed black and mounted the A/C bracket up for good.

http://i172.photobucket.com/albums/w...psmhafzigf.jpg

We had to take one frame mount bolt for the notch so I drilled and tapped the frame for another one. I made a 3-1/6" thich washer (plate) to cover both bolt holes to help hold the frame mount istead of two washers with one side on each ground because they are so close together.

slenning 08-05-2016 07:00 AM

Nice work on the frame notch Wayne!! One step closer to getting this bad boy fired up!!!! :D Gonna be a great car

Sonar Chief 08-05-2016 09:12 AM

Very well done sir! :) Seems like the little stuff seems to take the longest don't it?

Keep at it!

waynieZ 08-07-2016 09:07 PM

Thanks guys we're plugging away.

waynieZ 08-10-2016 09:48 PM

Got a little done today, we started to make a top bracket to hold the A/C compressor in the low mount position. We had it together and then the A/C connections for the compressor came in and of course it was going to be tight on one side so apart it came. I bent up another arm and Spacemwn welded it on. I cleanded it up and primed it today and I'll paint it tomorrow.
Here it is in etching primer.

http://i172.photobucket.com/albums/w...pskc0xmzal.jpg

http://i172.photobucket.com/albums/w...psi2umx7pd.jpg

The little notch is to clear a bolt on the compressor.

http://i172.photobucket.com/albums/w...psj8vte5w4.jpg

http://i172.photobucket.com/albums/w...ps1frkfrxs.jpg

amazing how such a little thing takes so long to get it right. Thank god we enjoy this stuff! :superhack: :weld:

grendel 08-10-2016 09:54 PM

The last 5% takes 3x the time of the first 95%.

I am there now on Betrayal.


All times are GMT -7. The time now is 05:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net