What wheels did Rich decide on?

Rodger,
Larry has a ron davis intercooler for his 1968 project...

http://www.pro-touring.com/forum/sho...t=42538&page=7

I think it would work for a 1967, but I'm not sure about that.

I like the design for the intercoolers on johns 66

That thing sure looks cool, but If I can do a single inlet and outlet rich will be very happy when the bill comes. Plus it will clean up the engine compartment and not bury everything under plumbing. With that set up I would have to split the outlet from the Procharger to go to both sides and then connect them back togther for the throttle body. Since he is running twin turbos on that deal I think it is more well suited for his application.

Rodger

Rodger here's what I used......

Thanks, that is what I was thinking just wider or possibly two of them. I'm figuring we will have to modify that hood latch support brace and also fit the Ac condensor in there. If I can do a thinner but wider intercooler it will allow more direct air to the condensor. Air flow is key to a cold AC with 134.

Rodger

I fit the condensor in there and just had to notch the hood latch support a little....not a big deal realy.

Any updates?

I posted some pics of the exhaust we are building. It looks pretty good if I do say so myself.

Great looking exhaust. Pics of the tailpipes? Or still working on that? :thumbsup:

i agree!
what exactally did you do to the floor pans where the mufflers are!
it looks tucked up GOOD!!!!