thanks guys!

will paint the car black like the rendering in my signature ;)

today's update. test fitted my 20x10 wheel and oh well it looks SWEET!!!! :D

http://i60.photobucket.com/albums/h1...7/IMAG0443.jpg

http://i60.photobucket.com/albums/h1...7/IMAG0447.jpg

brought body back on frame, put the stock rear end back on and tested the wheels again - wheel rubs bad on inside of the frame. will try a wheel adapter to make it fit but maybe will also notch the frame a little. but will test with a adapter first.

http://i60.photobucket.com/albums/h1...7/IMAG0450.jpg

http://i60.photobucket.com/albums/h1...7/IMAG0453.jpg

unfortunately front wheels won't clear C5 calipers/brakes without spacers. but I'll get some 20mm adapters/spacers on rear and will try them on front as well.

http://i60.photobucket.com/albums/h1...0/IMAG0457.jpg

http://i60.photobucket.com/albums/h1...0/IMAG0454.jpg

fronts are 20x8.5 with 5.25 BS and rears are 20x10 with 5.5 BS

oh and here some pics of my sweet nice doors :D

http://i60.photobucket.com/albums/h1...0/IMAG0462.jpg

http://i60.photobucket.com/albums/h1...0/IMAG0466.jpg

http://i60.photobucket.com/albums/h1...0/IMAG0459.jpg

Some more work Kev! Nothing you could not fix!

thanks! :)

I test fitted H&R 20mm adapters/spacers on each side today. for first on fronts - now the front wheels clear the C5 calipers :thumbsup:

http://i60.photobucket.com/albums/h1...4/IMAG0529.jpg

http://i60.photobucket.com/albums/h1...4/IMAG0530.jpg

http://i60.photobucket.com/albums/h1...4/IMAG0532.jpg

so I tried the 20mm spacer on the rear and it looked like this:

http://i60.photobucket.com/albums/h1...4/IMAG0548.jpg

I think it looks okay and clears the frame now - but I think I want 30mm spacers now :D just added some washers to simulate a 30mm spacer:

http://i60.photobucket.com/albums/h1...4/IMAG0555.jpg

http://i60.photobucket.com/albums/h1...4/IMAG0557.jpg

http://i60.photobucket.com/albums/h1...4/IMAG0558.jpg

http://i60.photobucket.com/albums/h1...4/IMAG0560.jpg

Please note there's no weight/interior/doors/engine in the car so thats why the suspension is pretty high right now LOL

oh and here's another cool shot (with 20mm spacers):

http://i60.photobucket.com/albums/h1...4/IMAG0553.jpg

Looking fine now! Even with the 20mm spacers. You probably need to roll the fenders with 30mm.

I agree with Knaller the 30's might be tight to the outside.

thanks guys! yeah I'll cut and roll the fenders lips :thumbsup:

today I cut my rear fender lips a little. stock lips are about 1" wide.

http://i60.photobucket.com/albums/h1...8/IMAG0573.jpg

I half cut them and will roll them later to clear the tires.

http://i60.photobucket.com/albums/h1...8/IMAG0576.jpg

http://i60.photobucket.com/albums/h1...8/IMAG0579.jpg

http://i60.photobucket.com/albums/h1...8/IMAG0584.jpg

I removed the rear springs yesterday and set the car's height to what I want the ride height later. I wanted to see if it'll fit with the trimmed fenders lips and the 30mm spacer. Looks like I just need to roll the lips now and I'll be set.

http://i60.photobucket.com/albums/h1...5/IMAG0601.jpg

http://i60.photobucket.com/albums/h1...5/IMAG0610.jpg

http://i60.photobucket.com/albums/h1...5/IMAG0615.jpg

http://i60.photobucket.com/albums/h1...5/IMAG0616.jpg

I'm glad its going to work out for you.