Funny thing is it only snowed three or four times last winter. So I might not need chains.


Sent from my iPhone using Tapatalk

Okay it’s been a long time since I did an update. So here is just a quickie. What started out as a fuel line leak turned into a while we are here moment.

Long story short the rear diff is out and heading to the powder coater. Once I get garagescene.net back up I’ll post up more pictures.

https://uploads.tapatalk-cdn.com/201...fe60b8bc19.jpg


Sent from my iPhone using Tapatalk

Wow...just wow.

:shakehead:

9 months...we deserve so much more.


:P

So since I accidentally posted this in (70 Camaro's) build thread which I noticed yesterday and yes I feel horrible about doing that because well i just do. Plus his car is so awesome and if you haven't seen it go look at it.

https://lateral-g.net/forums/showthread.php?t=51291

Just look at this beast, it's freaking awesome and when I finally paint my car a color I am seriously going to consider painting it red like his car.

This is not my car it's (70 Camaro's car) and i just realized I don't know his name.

https://lateral-g.net/forums/attachm...1&d=1535327225

Okay so back to my 10 footer

Since this project was never designed to be finished and would be something that I could work on f or years. It’s time to move to the
next stage of wrapping the headers and installing DEI heat shields on top of the mufflers as the rear floor gets a little hot from the mufflers.

So let’s not talk about why we had to cut the exhaust and just say that slip fit was a bad idea.

https://uploads.tapatalk-cdn.com/201...0dc4c419cd.jpg

https://uploads.tapatalk-cdn.com/201...95e5643d18.jpg

As you can see Mike looks very serious.

https://uploads.tapatalk-cdn.com/201...a36c2a4a1d.jpg

https://uploads.tapatalk-cdn.com/201...f7ca778142.jpg

https://uploads.tapatalk-cdn.com/201...0863d460f7.jpg


Thank you again Mike for all of your help.

Moving on to the header removal. Okay let’s just say this design worked perfectly as it was a 20 minute job to remove them.

https://uploads.tapatalk-cdn.com/201...6e6993a8da.jpg

https://uploads.tapatalk-cdn.com/201...7897efb191.jpg

https://uploads.tapatalk-cdn.com/201...0ff7c92111.jpg

https://uploads.tapatalk-cdn.com/201...0b6b776c74.jpg

When they go back in there will be ARP Header Studs going back in.

Just a quick shot of the Powder Coated rear end. Need to take inventory of all the hardware and order the new ARP 6 point stainless bolts and new EBC rotors in black.

https://uploads.tapatalk-cdn.com/201...16f4970f82.jpg

https://uploads.tapatalk-cdn.com/201...feb2dcabd1.jpg

Almost forgot that I worked on three fat bikes and did a carbon bar swap on Mikes 27.5 mid-fat bike.

https://uploads.tapatalk-cdn.com/201...e5fbbe725f.jpg

https://uploads.tapatalk-cdn.com/201...1da7cf7ce7.jpg

https://uploads.tapatalk-cdn.com/201...677b47771b.jpg


These three posts where from July 15th

I loved riding street bikes in my younger day, only difference is now I need seat from a 50's Super Glide. You know the one that's about the size of a trailer fifth wheel...........

Lately I’m feeling the need to buy one of those.


Sent from my iPhone using Tapatalk

You do need to buy a new bike or sumthun...Bruh.

:P

https://s20.postimg.cc/pl0dmyf5p/744...E3_FDFBA28.jpg

So the header are back from getting coated and the down tubes are wrapped in DEI Ti Thermal wrap. I also added studs to make it even easier to install the headers which takes all of 10 minutes for both sides.

https://uploads.tapatalk-cdn.com/201...d838b42063.jpg

https://uploads.tapatalk-cdn.com/201...a177fd660b.jpg

https://uploads.tapatalk-cdn.com/201...78825c6cdd.jpg

https://uploads.tapatalk-cdn.com/201...4e1ada72bb.jpg




Sent from my iPhone using Tapatalk