Great day, we got alot done.

Here is Jeriah's 67', he used my wheels and tires to test fit for the wheels he just ordered.

http://www.norcaltruck.com/01_misc_p...20fit%2001.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2002.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2003.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2004.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2005.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2006.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2007.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2008.JPG

http://www.norcaltruck.com/01_misc_p...20fit%2009.JPG


Jeriah has a awesome build going with some killer metal fab tricks. I will let him talk about the little things he is doing for his own touch to his car. As you see there is a rear axle missing....Fab9 coil over rear set up will be coming really soon after he gets his wheels and tires and he takes his last axle spec's. The stance you see is what he will be going after in the end. :thumbsup:

He is running SPC uppers and SPC lowers with ATX spindles.

Random shop scene for the day....

http://www.norcaltruck.com/01_misc_p...c/IMG_2606.JPG

Fab9 / G-Link ready to go back in my car....:woot:

http://www.norcaltruck.com/01_misc_p.../Fab9%2004.JPG

Thanks for posting the pics, it was a productive day. One day I'll have to get you to help me start a build thread so everyone else can see what all has been done to get the car even to where it is now...

And where I got on my car for the day....

http://www.norcaltruck.com/01_misc_p.../Fab9%2005.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2006.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2007.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2009.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2010.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2011.JPG

http://www.norcaltruck.com/01_misc_p.../Fab9%2012.JPG

SPC upper/lower and ATX spindles....everything is only hand tight and still need all new steering tie rods and upper drop stops and fine tune on the ground. Our first coils ordered are not coming, I guess they are not selling them as fronts any longer so I need to figure out another coil spring to use and Jeriah went ahead and purchased another brand. I have the front Vari shocks but need the coils before I install them.


Over all just a good day of no dead lines and sitting back and hanging with friends and playing with the cars. Can't beat that:lateral:

Dude.. a couple of badass Chevelles in progress over there. Sweet.

I see a new sign on the building in the near future.... "Norcal Chevelle" :lol:

My car is going down to Gilroy for phase 2 here in December sometimes, but I'd love to be able to come by for a rescheduled gathering before if you decide to do it soon. Perhaps the weekend of Dec 4? :unibrow:

Gilroy huh? who might be down there???

A friend of mine, Rich, has a shop down there. He does a lot of Camaros on the side of his regular job. Great guy - he is supposed to come up to the get together at Nick's with the SEMA Camaro he built.

Beautiful!
 

Can't wait for the get together! Hope the wheather holds. Let us know.:dance: :dance: :dance:

Update
 

Talked to Nick tonight and there could be a do-over of this get together this weekend -- weather pending. Forecast calls for rain on Sat but sunny on Sunday as of right now.

Will be taking a look at the weather on Wed and try to figure out if this is gonna happen before all the holiday parties and shopping starts up.

Weather looking no bueno... :(