Lateral-g Forums
Page 12 of 22 « First 21011 12 1314 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   "BLACK WIDOW" 68 Firebird MetalWorks Pro-Touring build (https://www.lateral-g.net/forums/showthread.php?t=51392)

Zoomin 05-09-2016 07:49 PM
What are the wheel/tires sizes going to be? Are you going to use Ride Tech's Tru Turn up front?

Nice work!

MetalWorksClassics 05-11-2016 03:07 PM
The tires are 275/35ZR18 and 315/30ZR18...wheels are 18".




Quote:
Originally Posted by Zoomin (Post 637260)
What are the wheel/tires sizes going to be? Are you going to use Ride Tech's Tru Turn up front?

Nice work!

Zoomin 05-11-2016 06:34 PM
Quote:
Originally Posted by MetalWorksClassics (Post 637412)
The tires are 275/35ZR18 and 315/30ZR18...wheels are 18".
I guess 9's and 12's? Tru Turn?

MetalWorksClassics 05-13-2016 09:28 AM
Wheels are 10" and 11"...not sure on the Tru Turn...the front "clip" was supplied by our customer so I'm not exactly sure what all is included in the set-up and the clip in tucked away currently as the body in on a rotisserie in the body shop...but I'll try and let you know when we pull it back out.


Quote:
Originally Posted by Zoomin (Post 637417)
I guess 9's and 12's? Tru Turn?

MetalWorksClassics 05-18-2016 04:42 PM
Front sheet metal gasp
 
6 Attachment(s)
Tightening things up.

Chicken Louie 05-19-2016 06:54 AM
Looking Good
 
Love the work you are putting into this bird!!

Juicypop 05-19-2016 08:21 AM
Great job with the build looks awesome!

EBMC 05-20-2016 06:37 AM
Quote:
Originally Posted by MetalWorksClassics (Post 630039)
Our customer wanted a custom gas door, so we fab'd up a mounting plate.
Nice work guys!! Thanks for using KD filler. Awesome build

preston 05-20-2016 01:49 PM
in that a photo of you using a spot welder to shrink the metal ?
or is something else going on there ?

If you are shrinking, do you use a wet rag or what after you zap ? Curious about your technique there.

MetalWorksClassics 05-27-2016 09:06 AM
Yes, you are correct...we were using the spot welder to shrink the metal...we would cool the metal with compressed air at each hit.


Quote:
Originally Posted by preston (Post 637858)
in that a photo of you using a spot welder to shrink the metal ?
or is something else going on there ?

If you are shrinking, do you use a wet rag or what after you zap ? Curious about your technique there.


All times are GMT -7. The time now is 12:40 AM.
Page 12 of 22 « First 21011 12 1314 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net