http://forumbilder.se/I47CR/4fe9bc5c...d6d760dc1.jpeg

Printing has begun! Hopefully finished by next week so we can testfit everything before final product gets milled.

Ordered an Aeromotive fueltank and straps yesterday, Im getting hopeful that I can get the car running by this summer :whenitsdone:

Looking forward to it. Keep at it and you’ll be there in no time.

http://forumbilder.se/I4FVP/img-20190215-132615.jpg

All the parts were printed and glued together for testing!

http://forumbilder.se/I4FVP/img-20190215-181822.jpg

Its a big unit :innocent:

http://forumbilder.se/I4FVP/img-20190216-180740.jpg

We need to raise it a couple of inches because the engine has been moved back 1" since we made the design.

http://forumbilder.se/I4FVP/blower2-0.jpg

the new 2.0 design is well on its way, we are gonna print those parts also for testing.


wireharness for my fueltech ft500 is being made by a buddy.
wheels, steering column, gastank and lots of small parts are being shipped from florida this week. should be here in beginning of april.

http://forumbilder.se/I4GFH/676da14b...b3e005171.jpeg

Version 2.0 in progress, location has been changed to higher and closer to the motor.

http://forumbilder.se/I4GFH/b9214e55...afa94da97.jpeg

Installed dash and started wiring, the RTX gauge looks really nice!

Progress! What’s the weather over there Currently?

Well, it has been a bit warm lately so the snow is melting away rapidly. I am hoping for a couple of months more of winter :)

Need to get more miles on the sled and more time to finish the car :thankyou:

http://forumbilder.se/I4O9E/e5c30c87...f3ade969f.jpeg

A buddy is building the harness for the Fueltech FT500, should be done next weekend.

http://forumbilder.se/I4O9E/2e7df398...5f7cb20c2.jpeg

I like the kind of stock look of the engine :whenitsdone:

http://forumbilder.se/I4O9E/f0e73e6c...e14891ec7.jpeg

Had to pull the dash again to reach some wiring but now its there permanently :thumbsup:

http://forumbilder.se/I4O9E/148ada06...0bb17c306.jpeg

Put it on blocks for a better work position on the wiring.

http://forumbilder.se/I4O9E/e77cf007...20563b73a.jpeg

New workplace for 4 months. Its a new heating plant, I have all the firesprinkler installation on site.

http://forumbilder.se/I4P8P/ed139a01...e77545b07.jpeg

Well, the harness is Done but he flew over to you guys over the weekend so I wont have it until next week.
They are at Bigun in NC and prepping their Corvette C4 for Dragweek!

I will spend the weekend sledding instead :badidea::lol::lol:

[QUOTE=warhawkchevelle;689992]http://forumbilder.se/I4GFH/676da14b...b3e005171.jpeg

Version 2.0 in progress, location has been changed to higher and closer to the motor.

Nice work here guys....especially the CAD.......I'm just wondering why u need the guide roller on the long bracket at the top nearest the turbo?
Seems to me the tensioner will wrap the belt around turbo pulley better without that roller.

Just asking :y0!:

http://forumbilder.se/I5318/ce0b67f0...6e4daa712.jpeg

Picked up some long awaited parts :lol:

http://forumbilder.se/I5318/d17a7c04...81fa9fa9e.jpeg