great job, i really like the color choice . the countersunk washer headed bolts what size are they on the innerfender? i have looked for these in 1/4 and 5/16 . the mc master catalog dont have these in these sizes . i have thought of making these on the lathe but if i can buy them it would be easier .

95481a029
 

Kenny,

Look for pn 95481A029 in the McMaster website or on page 3067 in their catalog.

jp

Fantastic John!

What 'spacers' or something do you have under the countersunk washers? Looks great.

I have both McMaster Carr and Newark Electronics catalogs... if you can't find what you need in either of those 3k+ page catalogs, it doesn't exist. lol

Spacers?
 

Thanks Rick (and others)!

I'm not sure what you mean by spacers, though. On the inner fenderwells, the flat countersunk cap screws use a black countersunk washer to spread the load across as much area as possible to keep the aluminum from dimpling.

Unless you meant somewhere else, there is no spacer: just a bolt and washer.

jp

Thanks, John. It's the washer I was seeing and trying to describe.