Dreamin Ta's
 

Chet
Did not realize they were taking pictures
Thank you so much

Were you there?

Bob

I'm always there. I'm one of the core group that helps setup and tear down the site every event. Currently driving a friends C4 in CAM-S being my C5 is still down being I blew the motor last year.

Thanks for the tip, Chet--the pics are great! I was in the weird white Falcon, by the way . . .

Cool, I saw that falcon. I didn't get a chance to really check anything out. We were running around, setting up practice course and getting ready for the BBQ that night.

Glad to see you guys had fun.

Dreamin Ta's
 

So Frank Stagnaro and Jesus were eyeing Rustomatic's
car and talking and admiring the home made flairs.... I introduced
Paul to them and his first comment was they were a
couple of legends.. big smiles came up on both of them
I always like to watch those two guys drive a car and
wonder how the hell they make it look so easy... they are
so smooth like floating on the track.. so many championships
between them

Bob

Nice action shot, Bob!

Dreamin Tas
 

Guess it has been some time since I have posted
anything about my car... still need to install the valve springs
but someone asked to see a picture of the Last of the Breed
sticker I have on the car... Trans am group had some made
up years back and I bought a couple of sets

Need to get back on the Ta.. been doing a restroom, laundry
room remodel and still working on my old C10

Bob

Dreamin tas
 

Sorry to say I sold my 1970 Firebird of over 30 years yesterday
Been a great journey and hope the new owner enjoys
it as much as I have over the years.

Working on the new GT-1 Racecar with the Hendricks cup engine
Should be a wild ride.. and of course I still have my trusty
#3 Black Winged Pantera

Bob

Bob that's a long time to own a car, best of luck in your endeavors!

I'd had my TA for 21 years when I sold it earlier this year. Felt very weird deciding to sell it, but I made the right choice. I'm sure you'll feel the same way. Good luck, Bob!

Bob, selling a car after that long is no easy decision. I have owned my Firebird for coming up on 33 years and it is just a part of who I am. (Putting it in words sounds superficial, but it's true) I haven't driven it in 10 years now due to "updates", but I enjoy the thrill of the chase to get it where I want it. Glad I am fortunate enough to not need to sell it, and at the same time not in a position to buy any new toys so to avoid any tough decisions.
Keep enjoying your Pantera and I'll keep tuned in on your GT1 adventure. It sure looks like it's gonna be a blast!

DREAMIN TAS
 

So finally found another car to replace my
Firebird... actually a 74 Camaro. Restoration guy
was working on his track car but it has been sitting
for over 10 years.. he put a 70 tail and front end... I talked
him into taking off the front end so I can do a 70 trans am
front end in fiberglass... it has C4 front and rear clip suspension
.. still needs some fab work.. cage started etc Has a title so I will
make it a street legal Race Car... minimum interior... try to keep
it as light as possible

Might take a while as my Race Car engine is almost done
The Journey begins

Bob

Nice, looking forward to progress pics

That big hole in the firewall feels quite familiar. When I built the red Camaro way back in 99-02, I started with a car that my father had done the same thing to. Had to cut a patch from another car as well as drill out the whole cowl area on both cars to put it back together.

If you plan an engine setback, then at least the hole is already cut for you. ;)

Good luck with the project!

DREAMIN TAS
 

Yes thinking of setting the engine back
I think the vette suspension is out... looking
at several options for a frame or maybe Alson
rear end with the mid chassis bracing and Speed tech
extreme front end

Nascar engine and barely street legal

Bob

Oh, this sounds awesome. Good luck, Bob. Keep us posted with lots of pictures.

DREAMIN TAS
 

So I decided to tweak the Pantera and start racing it again
Back end of the car is twisting so I am having Down bars
added to the rear of the car attaching to the Cage inside
It is a pain as I have to remove the rear window and then
fab a Lexan piece to fit around the new tubes. We decided
to make a plate bolted thru the nice painted wheel well and
tie to the shock below. Attached is the brackets being fabbed
for the shock attachment... tubes will weld to the plate above
and we will also attach to the truss we already have between
the wheel wells... This should brace things up nice

Bob

DREAMIN TAS
 

Rear bars are almost complete. Drill a couple of holes
in one bracket and weld it in. Then I need to fit a new
Lexan window around the tubes as they pass thru to the cage

Bob

DREAMIN TAS
 

Pantera Slicks showed up. Took them to
my Buddy Juan down the street at his Ferrari shop
and had them mounted up... waiting on the car to
come back from fab guy working on rear window piece

Bob

Those are meaty!