Looks great!

I got a couple more pictures of the wiring, Dakota Digital just about all mounted and wired. Hoses for the A/C done accept for one, needed another piece of hose that's on it's way.

Here's a few pictures of progress.

https://i172.photobucket.com/albums/...pstkk4dwch.jpg

Here's the A/C hoses going in.

https://i172.photobucket.com/albums/...pskg5gr0yc.jpg

Nice!!

Looking good Wayne...

I got a few more pictures of the wiring.

We decided to mount the Vapor Worx controller in front of the battery for ease of adjustment if it's ever needed. It comes dialed in for the LSA crate engine.

https://i172.photobucket.com/albums/...pseckbykuu.jpg

Here's the trans controller. It's where the Astro vent came through on the drivers side.

https://i172.photobucket.com/albums/...psit7p9qyl.jpg


Here's the tap shifter, trans gear indacator, DSE electric head light door, & wiper controll boxes mounted over the steering column.

https://i172.photobucket.com/albums/...psk7d3optg.jpg

https://i172.photobucket.com/albums/...psywfhxzex.jpg

I stopped by today to bring the Battery, and some other parts and check it out. This is the first time since all the Covid crap started. Everything that was in plastic split loom is now in braided split loom. I'm having him put expanded braid cover on the A/C and heater hoses to help them match. If they pick up too much dust later, I can remove them.

Let me try this again!! I had this whole update done and was checking for spelling clicked behind a word to add an s...... wiped the whole this out. I've made dumb mistakes before but this is twice in two days.. Light a candle for me I'm about to launch the keyboard into the fish tank.

OK the wiring for the digital Dakota controllers to the gauges is done accept for re installing it once the wiring behind it for other things is done.
These are earlier pictures.

https://i172.photobucket.com/albums/...pstowvnwvd.jpg

https://i172.photobucket.com/albums/...pshnsnladb.jpg

https://i172.photobucket.com/albums/...pswyczmw4r.jpg

The NuRelic wiring for the power windows is in, the door boots and wiring for the motors is all in. As far as the switches go, I'm putting four in the console so I can control them all. I also picked up two extra with harnesses to install at each rear window. For back seat drivers to cool they're jets.
The console will have power going to the shifter for the buttons for the line lock when I install the solenoid. There will also be Key on power and one always hot too. I'll be installing a couple of phone chargers.

These A/C and heater hoses will be covered in expandable braid to help match the other hoses and wiring

https://i172.photobucket.com/albums/...pse81jytvz.jpg

The dimmer for the Dakota gauges are down where the emergency brake handle would be. You can see it to the lower left, it's aluminum now but will be changed to something the size of a tire valve cover in black.

https://i172.photobucket.com/albums/...psk7d3optg.jpg

Wayne, that looks great ... looks like 10lbs of **** in a 5lb bucket!

Oh ... keyboards don't float :shakehead:

As they say, Aint that the truth!

coming along nicely Wayne!

Checking in again on you Wayne ... 8)

Very nice !!

Cheers
Steve :trophy-1302: