I get multiple requests for what parts I still need every week, so here it is for those of you who might be interested!

Monetary donations always welcomed!
Trunk lid
Rear spoiler
Front spoiler
rear view mirrors
Bumpers
RS headlight parts
Hidden wiper motor
Entire windshield wiper setup
Rear interior panels
All the little trim pieces from the dash
LS1 MAF sensor
LS1 shorty headers
LS1 T56 bellhousing
LS1 T56 4th gear/input shaft
LS1 T56 6th gear
LS1 front plate
LS1 front and rear plates
Stereo system
2nd gen TA or Z28 rear axle, posi preferred!
New windshield and rear glass

And probably a ton of other stuff I'm forgetting. I'll update the post as I remember stuff. Feel free to PM me, post up, or send me an email to [email protected]

Thanks!

A guy on the Z28.com board donated the entire stereo system, so mark that off!

Got the gauge bezel all put together with the Autometer Ultra-lite II gauges and three LEDs donated by TheLEDLight.com. They are in a Covan's panel donated by Queen City Speed.
http://i97.photobucket.com/albums/l2...o/IMG_0884.jpg
http://i97.photobucket.com/albums/l2...o/IMG_0885.jpg

Also got in the Classic update complete wiring harness donated by American Auto Wire!
http://i97.photobucket.com/albums/l2...o/IMG_0918.jpg

I'm going to have a BIG update this weekend, so stay tuned! I also REALLY need any help we can get. We're running out of time and money fast with a lot left to do.

Sorry for the delay in updates! Been a crazy few weeks! Here are soom shots of the progress:
A guy on the Camaroforums.com donated a brand new set of rearview mirrors from Rick's!
http://i97.photobucket.com/albums/l2...o/IMG_1062.jpg
Also got the rear frame laid out, squared, and ready to be installed this week. Check out all my plumb lines and tape on the floor.
http://i97.photobucket.com/albums/l2...o/IMG_1075.jpg
Also had a MAF donated! I blasted it, cleaned it up, powdercoated it, and installed some stainless hardware on it.
http://i97.photobucket.com/albums/l2...o/IMG_1076.jpg
Also had a spare throttle body lying around so I took it apart and powdercoated it, along with the bracket and spring. I need the sensors for it if anyone has one lying around!
http://i97.photobucket.com/albums/l2...o/IMG_1126.jpg

And also got in my modified spindles, hubs, and caliper brackets from Ed Miller! Ed left them bare for me, so I blasted and powdercoated the spindles and brackets.
http://i97.photobucket.com/albums/l2...o/IMG_1123.jpg
http://i97.photobucket.com/albums/l2...o/IMG_1127.jpg
http://i97.photobucket.com/albums/l2...o/IMG_1128.jpg

Tomorrow night look for some LS1 front brake pictures!

How much time do you have left?? Go brother go!! :thumbsup:

And we have brakes! Got Ed Miller's LS1 front brake setup on the car and it is SWEET! The rotors are drilled/slotted donated by RotorsOnline. I didn't put the pads and all in yet because I had to order the hardware kit from CarQuest. But here it is!
http://i97.photobucket.com/albums/l2...o/IMG_1132.jpg
http://i97.photobucket.com/albums/l2...o/IMG_1135.jpg
And the steering linkages installed, with the exception of a pitman arm, which I still need one off of a power box for a 1st gen.
http://i97.photobucket.com/albums/l2...o/IMG_1140.jpg
And the front wheel installed!
http://i97.photobucket.com/albums/l2...o/IMG_1141.jpg
http://i97.photobucket.com/albums/l2...o/IMG_1142.jpg

The rear frame is finally squared up and installed! As soon as I get the new spring pads in the mail I'm going to have this car rolling!

http://i97.photobucket.com/albums/l2...o/IMG_1263.jpg

I got the car down and on four wheels the other day! Unfortunately, then is started raining and we had to push it back in before we could get pics. We then jacked the car up and started working on getting the mockup engine and trans in the car. Speed Hound has been working with us on some retrofit brackets, so we wanted to mock everything up to see what needed to be done before we put the new drivetrain in.

http://i97.photobucket.com/albums/l2...Camaro/1-3.jpg
http://i97.photobucket.com/albums/l2...Camaro/3-3.jpg
http://i97.photobucket.com/albums/l2...20Camaro/7.jpg

And more powdercoated parts by Triangle Musclecar. :)
http://i97.photobucket.com/albums/l2...20Camaro/8.jpg

I was just wondering the same thing. When is Shawn set to rotate home...June? That just around the corner! :_paranoid