I'm doing some modifications to the shorty hedman hedders. The passenger's side needed to have a tube moved so it would fit. I also cut off the collectors. They are supposed to be 2.5" but they were closer to 2.25" and had no length at all. I'll be putting on a longer collector that is 3" and then use a reducer after the collector to get the 2.5"

This is before i cut the collector off. I don't have an after pic.

http://www.bigblockdakota.com/hedderz-001.jpg

passenger's side with the #2 tube & collector removed

http://www.bigblockdakota.com/hedderz-002.jpg

with the new tube

http://www.bigblockdakota.com/hedderz-004.jpg

http://www.bigblockdakota.com/hedderz-005.jpg

Right now the front suspension is extended and up against the bump stop. I'll be needing a softer set of springs for the front and the rate will be determined after the truck is finished. There is plenty of room for the arm to have full travel and not hit the tube.

two projects at once. i thought you were stretched thin

is it time to come up for air yet?:D

I'll be making some progress between the holidays. I have the week off and should be in the shop for most of that time. :woot:

there ya go...........

Anymore progress pics? I just picked up 36 Dodge pickup, your build gives me some ideas.I'm planning for a bit of unorthodox powerhouse though:_paranoid

:cool:

Love this build, any updates? I definitely need to talk with you offline about some suspension ideas. Great stuff.

no progress lately. I've spent the little extra time I have had on the '68 satellite.

How's it going?