|
its got paint...its just several pages back.
|
A quick update on what I've been working on. Got the valve covers done today. They are stock style center bolt LS7 covers. the head, I believe is complete. A coat of primer should tell whether or not it is finished. I've also been working on a 1 piece racing seat. Something similar to a Recaro Profi. I'm on version 2.0 which is proving to be a little wide for the interior bucket. I'm thinking some custom door panels should take care of that. thats about it right now. I'll try and get some pictures up soon.
|
|
Alright. There was some tiger striping in the paint so I decided to repaint this beast. It is now sitting in a white base coat. Here are the paint choices I'm leaning towards.
Solid Color: Sunset Orange pearl Indigo Stripes: White w/ black or gunmetal hockey sticks Black w/ gunmetal hockey sticks I would really like some input on what you guys think so chime in and let me know |
Hope you don't mind that I bumped the pics of this beautiful color up so those have forgotten or just joined us can better help you without having to go search. I say leave it Sunset Orange Pearl with NO stripes. Maaaybe a different stripe, but I'm not sure about the hockey stripes. I'll have to put my mind to work and see if there's anything I can come up with. What's the word on the wheels? I saw some that might work for you, but they'll run you a little cash! PM me for details.
Quote:
|
Thanks for the bump. Man looking at those pictures I want to go back to the sunset pearl. Only problem is, I don't have enough left to re do the car. I've got it in black now. I think I might see if I can get some hockey stripe templates printed or drawn up and spray it to see what it looks like. I could go for an SS? Hood stripe I think someone has done the black/gunmetal like that. Keep in mind there will be a few more of these done with different wheel and drive train set ups. So there will be more chances for color. I think right now, due to lack of funds I'm leaning toward black/gunmetal.
As for the wheels. I've started casting the spokes and should have something to show late tomorrow I hope. They will look a lot like the wheels on penny, same color with an aluminum "hoop" or sleeve for the wheel |
So you're planning on doing more than one of these? Maybe black with the Sunset Orange Pearl stripes then? I'd seriously try to keep it S.O.P. if ya could. We've seen quite a few black Camaros. I hope you can find the funds to go back to the orange, even though...once you go black. Hahaha. Can't wait to see the wheels too. Hell, I can't wait to see it all put together!
My thoughts if you're going to go black, do a "blackout", or all black. Possibly even gloss with satin black finish stripes or vice versa. You could do brushed silver just a couple areas for interest (ie. brake calipers). Do a search for "1/12 Ferrari F40 Lightweight". It's a bit of an expensive kitbash, but there you'll find pre made black wheels, calipers and rotors. Just an idea. :thumbsup: |
At this point I don't see an end to the financial difficulties in the near future. I need to sand out the black and add another cote then its on to the hockey stripes.
|
|
Here is how its being done. the ring is two peices of styrene laminated together that I cut with a circle cutter. the spokes: I created one spoke to my specs, then I poured a one piece mold. I had trouble with the initial pour because the resin wasn't able to flow to the lower part of the mold. So I used some southern enginuity and opened up the mold from the bottom into the area where the spoke forks to allow the resin to flow down. Thank goodness this worked
|
| All times are GMT -7. The time now is 10:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net