Lateral-g Forums - This is MY 67 Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - This is MY 67 Camaro (https://www.lateral-g.net/forums/showthread.php?t=34830)

It looks good in there. It fits nice and tight to the frame rails.

Quote:

Originally Posted by waynieZ (Post 653633)

It looks good in there. It fits nice and tight to the frame rails.

Thanks Wayne, I have plenty of room to move inboard!

My OCD got the better of me and I remeasured both sides it's only 3mm or 3/32" difference!

Michael

You're making a lot of people look bad with the amount of progress you're posting...Keep it up!

:cheers: :flag2:

Quote:

Originally Posted by Sonar Chief (Post 653638)

Thanks Wayne, I have plenty of room to move inboard!

My OCD got the better of me and I remeasured both sides it's only 3mm or 3/32" difference!

Michael

I had typed that post then my wife dragged me away when I got back I hit post and you had posted the picture with the wheels on the car. Lol
Your air bar fits a lot tighter than mine does to the frame rails. Something else for me to figure out.
But your car is coming together nice. Keep up the great progress.

I don't know if its just me, but sometimes i can't go to the last page of this thread so for example right now if i go to page 130 or 131 it takes me back to page 129.:computer:

Hmm ... I can always go to last page, maybe a mod will chime in, sorry I can't help!

Michael

Quote:

Originally Posted by Mikael A (Post 653722)

I don't know if its just me, but sometimes i can't go to the last page of this thread so for example right now if i go to page 130 or 131 it takes me back to page 129.:computer:

This is a known issue and only applies to a few of our members. This happens simply because you move slower though time than the rest of the world. If further proof is required, look no further than your closet. Cords, eight track tapes and VCRs are no longer in style, considered modern or even vintage for that matter.

:snapout:

Honestly this is the first I've heard of that. Is it just in this thread or in all of them?

Quote:

Originally Posted by Spiffav8 (Post 653756)

Haha :D just in this thread,i can get to this page if i click on last post but i still can't get to page 130

Quote:

Originally Posted by DBasher (Post 653645)

You're making a lot of people look bad with the amount of progress you're posting...Keep it up!

:cheers: :flag2:

Keep on:thumbsup: keeping on .... don't mean no harm!

Quote:

Originally Posted by waynieZ (Post 653648)

Thanks Wayne, figured timing was off!

Quote:

Originally Posted by Spiffav8 (Post 653756)

This happens simply because you move slower though time than the rest of the world.

That's too funny, might have some truth in though!

Well, you know what happens when you ASSUME ... yeah you end up pulling the whole rear end out from under the car to install the third member, grrrr. Seems the studs on the housing and the holes on the center section didn't line up and after 2hrs and lots of colorful words I had to pull it out and use the LFH to align the studs w the holes! Used gravity to install the 80+ lb center section and then more colorful words and some redneckery she's back under the car and I am going to see the chiropractor tomorrow, lol!

Take a look ...

http://imagizer.imageshack.us/v2/102...922/P6FsON.jpg
Did some bonding too both side cowls are installed now!
http://imagizer.imageshack.us/v2/102...923/D7wZbk.jpg
Not a good start to the day, should have tested this before ....
http://imagizer.imageshack.us/v2/102...923/qLqspK.jpg
That's mo better!

Done for the day, thanks for looking ...

Looks great to me even if I'm a little slow haha.