More ARP Hardware (01-01-20)

http://www.garagescene.net/_data/i/u...5a68b14-me.jpg

http://www.garagescene.net/_data/i/u...a8db375-me.jpg

Reduced Angle brackets fresh from the Oven.

http://www.garagescene.net/_data/i/u...2e3a68b-me.jpg

DSE Brake Booster going back in.

http://www.garagescene.net/_data/i/u...770a74f-me.jpg

http://www.garagescene.net/_data/i/u...f351ae1-me.jpg

Need to clean up my Stainless Steel Nuts.

http://www.garagescene.net/_data/i/u...658c7c0-me.jpg

http://www.garagescene.net/_data/i/u...f98ceb7-me.jpg

I love this pedal assembly

http://www.garagescene.net/_data/i/u...0109f56-me.jpg

Nice work, Marty!

Thank you.

This go round of the build is all the stuff I wanted to do the first time but with that cancer thing the goal was to just get the car done and make a nice driver. This go round I get to do all the little details that most people won't notice and the timing couldn't be better as with the social distancing and the lock down am fairly certain my family would kill me if was in the house all night. I'm not much for sitting around so this is keeping me sane.

wow the pedal setup look really pretty. is this custom?

Yep, a Gentleman from New York I think made them and thankfully I put the clutch pedal, small brake and clutch reservoir from him as he is no longer making them.

[QUOTE=syborg tt;702588]Time to get the subframe back under the car. (11-23-19)


Been lurking .... great progress and that's a lot of blue tape buddy!!!

[QUOTE=Sonar Chief;702786]Thank you and I love that blue stuff.

Still plugging along (01-04-20)

Redoing the factory shifter assembly and I need to thank Jay at Pro-Tek Powder Caoting in Joliet for doing such a great job on the base bracket that will never be seen.

http://www.garagescene.net/_data/i/u...10e4e34-me.jpg

So at some point I would love to talk with the guys at DSE and see if I can get the billet shifter they did in the Chevelle.

http://www.garagescene.net/_data/i/u...012a541-me.jpg

The ShiftWorks brackets going in.

https://shiftworks.com/collections/c...camaro-shifter

http://www.garagescene.net/_data/i/u...2742278-me.jpg

http://www.garagescene.net/_data/i/u...72f0e45-me.jpg

I think this is the easiest thing I have done on this car to date.

http://www.garagescene.net/_data/i/u...f1b11a3-me.jpg

So I was trying to clean out the threads and well I kinda pulled out the nutsert. It just so happened this
one was frenched in the floor vs the other two that went through the floor pan. (01-07-20)

http://www.garagescene.net/_data/i/u...2b5433a-me.jpg

Time to break out the JB Weld

http://www.garagescene.net/_data/i/u...c5b5418-me.jpg

and let's try not to JB Weld the bolt in.

http://www.garagescene.net/_data/i/u...597d45c-me.jpg

http://www.garagescene.net/_data/i/u...95f9cf2-me.jpg

Stay Tuned to see what happened.

Planning for the Holley EFI Harness ( 01-07-20 )

The goal is to hide as much as possible yet still be able to get to things if needed so I am going to hide some stuff in above the Anvil Inner Fenders.

http://www.garagescene.net/_data/i/u...b46c382-me.jpg

When Larry redid the firewall I had him take the ugly lip off the firewall. I am still not sure if I am going to put a weather strip across the top. But at least I planned for it if I needed it.

http://www.garagescene.net/_data/i/u...4497661-me.jpg

http://www.garagescene.net/_data/i/u...58527e3-me.jpg

Gratuitous Car Picture ( 01-09-20 )

http://www.garagescene.net/_data/i/u...a77ccb2-me.jpg

and yes I know I have way to many Hot Wheels.