Strictly a street car as I don't feel it has enough safety features in it that would save my life if I crashed. So this
one will do the Power Tour and see a bunch of mountain bike trails.

I also have the Cayman R and the 2010 Camaro if I want to hit the track or autocross. Something about having
airbags, ABS and updated safety features that at this point in my life seem really important.

Coil Brackets (02-02-20)

So at this point I am assuming at this point that my coil brackets are upside down so I am going to flip them to see if the coils come down just a little bit to take the tension off the plug wires. If not I am going to have to remake the wire as I don't like how tight they are.

http://www.garagescene.net/_data/i/u...562ab91-me.jpg

and yes that is a mountain bike tool being used on my car. Which got me thinking....

http://www.garagescene.net/_data/i/u...35a93b9-me.jpg

At some point the Custom Works Carbon Valve covers we be heading over to Gonzo Details for paint correction and a paint sealer.

http://www.garagescene.net/_data/i/u...35a93b9-me.jpg

Flipped

http://www.garagescene.net/_data/i/u...e707a68-me.jpg

http://www.garagescene.net/_data/i/u...ba51aa5-me.jpg

Well that didn't work out so it looks like we will be making new wires.

http://www.garagescene.net/_data/i/u...9cb52b0-me.jpg

Next up is planning, neatly hiding and running wires so they will be easy to access if I need to service them.

http://www.garagescene.net/_data/i/u...64df62b-me.jpg

making a new hole.

http://www.garagescene.net/_data/i/u...c645d2b-me.jpg

Grommet installed and I promise I will clean up the DEI Boom Matt to make it look nice.

http://www.garagescene.net/_data/i/u...fed2b23-me.jpg


Back to the Holley Terminator wiring and I am hoping all of my planning pays off with all of the hose routing and
wiring. Confirming the location of where I want to mount the relays. Once I feel confident I will install the "Weld Mounts"
which are a stud that are glues in with panel bond.


http://www.garagescene.net/_data/i/u...a74a6c5-me.jpg

http://www.garagescene.net/_data/i/u...a74a6c5-me.jpg

These are going to be fun to put the washer, lock washer and nut on.

http://www.garagescene.net/_data/i/u...95461f6-me.jpg

http://www.garagescene.net/_data/i/u...3830f18-me.jpg


I think this is the final.

http://www.garagescene.net/_data/i/u...0c98fb1-me.jpg

More notes on the blue tap.

http://www.garagescene.net/_data/i/u...38490fa-me.jpg

Lokar Dip Stick (02-02-20 )

Not liking the stainless look so in order to tone it down just a little I wrapped it in the High Temp Tech Flex wrap.
Being hones if I didn't already have this I would be putting in a stock dipstick.


http://www.garagescene.net/_data/i/u...647062e-me.jpg


Instead of cutting with Scissors they recommend a Hot Knife so a quick trip to Harbor Freight and $20.00 later this will work.


http://www.garagescene.net/_data/i/u...f2420f1-me.jpg


I used an adhesive based heat shrink so it's nice and tight and I am hoping the engine heat doesn't cause an issue. I am also
consider a factory dip stick as they work and it's already black so it will disappear when you look in the engine bay.


http://www.garagescene.net/_data/i/u...7309d59-me.jpg

Well it at least looks better.

http://www.garagescene.net/_data/i/u...58b3115-me.jpg

More stuff arrived.

http://www.garagescene.net/_data/i/u...0b82c6e-me.jpg

http://www.garagescene.net/_data/i/u...84fd6ca-me.jpg

Back out in the Garage again (02-16-20)

http://www.garagescene.net/_data/i/u...63446db-me.jpg

http://www.garagescene.net/_data/i/u...c58eaa3-me.jpg

http://www.garagescene.net/_data/i/u...fe6dacc-me.jpg

I was hungry so I looked in my wife's car and found some snacks

http://www.garagescene.net/_data/i/u...931f921-me.jpg

Another harness that I am going to redo...

http://www.garagescene.net/_data/i/u...0193092-me.jpg

This was the original fuel pump wire.

http://www.garagescene.net/_data/i/u...c747158-me.jpg

Time to remove and clean up the harness.

http://www.garagescene.net/_data/i/u...3c1b348-me.jpg

While I am here I might as well clean up the tail light harness.

Odd it doesn't look so bad on the ground...To late now


http://www.garagescene.net/_data/i/u...7f28dd4-me.jpg

My desk for the next couple hours.

http://www.garagescene.net/_data/i/u...a0f3ea8-me.jpg

Looking better already.

http://www.garagescene.net/_data/i/u...e6c5ad7-me.jpg

Here we go.

http://www.garagescene.net/_data/i/u...22ec61e-me.jpg

Bye Bye

http://www.garagescene.net/_data/i/u...e839c5e-me.jpg

http://www.garagescene.net/_data/i/u...d410261-me.jpg

http://www.garagescene.net/_data/i/u...7ff6c72-me.jpg

http://www.garagescene.net/_data/i/u...d269567-me.jpg

time to get rid of a few feet of wire.

http://www.garagescene.net/_data/i/u...c236f60-me.jpg

http://www.garagescene.net/_data/i/u...121e4e4-me.jpg

shorter is better.

http://www.garagescene.net/_data/i/u...87d014e-me.jpg

http://www.garagescene.net/_data/i/u...a544ebc-me.jpg

http://www.garagescene.net/_data/i/u...294ecfe-me.jpg

this is how much wire was removed. (02-17-20 )

http://www.garagescene.net/_data/i/u...6a72c0e-me.jpg

http://www.garagescene.net/_data/i/u...64c2226-me.jpg

Looks like my desk is back.


http://www.garagescene.net/_data/i/u...65dc4e1-me.jpg


time to splice and join.


http://www.garagescene.net/_data/i/u...555000f-me.jpg


http://www.garagescene.net/_data/i/u...9fec6b2-me.jpg


http://www.garagescene.net/_data/i/u...c5ffffc-me.jpg


and Thank you Foster Grant for making Multi-Focal cheaters as I needed them for this project.


http://www.garagescene.net/_data/i/u...8e03e39-me.jpg


http://www.garagescene.net/_data/i/u...0c7dda8-me.jpg


Time to wrap with Tech Flex Wire Wrap

http://www.garagescene.net/_data/i/u...a67fe7c-me.jpg


http://www.garagescene.net/_data/i/u...5cfe1e6-me.jpg


http://www.garagescene.net/_data/i/u...7dcfa99-me.jpg


More notes

http://www.garagescene.net/_data/i/u...1c631a5-me.jpg


http://www.garagescene.net/_data/i/u...b16cf23-me.jpg


http://www.garagescene.net/_data/i/u...43319f7-me.jpg


http://www.garagescene.net/_data/i/u...d88a121-me.jpg


http://www.garagescene.net/_data/i/u...f04f2f2-me.jpg


http://www.garagescene.net/_data/i/u...e17ece6-me.jpg

Moving back to the front of the car. (02-19-20)

http://www.garagescene.net/_data/i/u...34e9304-me.jpg

The Dot's represent where I will bond in the "Weld Mounts"

http://www.garagescene.net/_data/i/u...2084c5a-me.jpg

http://www.garagescene.net/_data/i/u...8a78c61-me.jpg

http://www.garagescene.net/_data/i/u...30f7de8-me.jpg

http://www.garagescene.net/_data/i/u...79e6af8-me.jpg

Looks like there is plenty of clearance the bend doesn't look that bad

http://www.garagescene.net/_data/i/u...0aa247e-me.jpg

Vintage Air

http://www.garagescene.net/_data/i/u...3b82858-me.jpg

http://www.garagescene.net/_data/i/u...42aaeab-me.jpg

Studs going in.

http://www.garagescene.net/_data/i/u...e34166b-me.jpg

Off to Ace Hardware for more clamps and a Chunky Bar.

http://www.garagescene.net/_data/i/u...420d0bc-me.jpg

While the epoxy is drying I am going to jump back to the taillight harness.

and yes I put this Circle in for a reason.

http://www.garagescene.net/_data/i/u...b71a23e-me.jpg

Back to the Holley EFI Harness (02-20-20)

Remember the blue notes.

Since this is a ground stud I removed all of the paint and I also removed the paint from the inside of the cowl.

http://www.garagescene.net/_data/i/u...68d66b0-me.jpg

Good News every stud was place in the correct location + or - milometers.

http://www.garagescene.net/_data/i/u...d012f6f-me.jpg

http://www.garagescene.net/_data/i/u...dafa217-me.jpg

http://www.garagescene.net/_data/i/u...4be449a-me.jpg

http://www.garagescene.net/_data/i/u...f072ce0-me.jpg

http://www.garagescene.net/_data/i/u...6aaa34f-me.jpg

The view from the back seat

http://www.garagescene.net/_data/i/u...0030b4a-me.jpg

http://www.garagescene.net/_data/i/u...461a015-me.jpg

Marty, that stay at home advisory is really working in your favor by getting a bunch of small detailing stuff done. I picked up some of that wire wrap to use as a conduit for wiring going from the trunk area to glovebox, keeps them nice and neat & protected.
Hey if you don't mind...... in the pics of your spark plug wires, your grommet on your firewall that feeds your main harness looks nice and snug, care to share which one you used. Thanks.
Keep up the tidy detailing!