Lateral-g Forums
Page 14 of 17 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project Orange Krate lives! - NOW AT Comp-Spec (https://www.lateral-g.net/forums/showthread.php?t=16686)

Steve1968LS2 12-19-2010 10:41 AM
Quote:
Originally Posted by Northeast Rod Run (Post 322280)
Hey Pete no pressure, but now that Karma is gone how about doing some occasional Orange Crate updates on here:yes:

Then again don't you excel when you're under pressure?:unibrow:
Lots of work has been happening on the Krate.. just not much posted here. :)

Go to www.camaroperformers.com and you can find a bunch of tech stories.

The DSE suspension is in place and this week I build the 416 stroker LS3 for her.

The next big step is paint..

waynieZ 12-22-2010 10:40 PM
Hey Steve is the engine going to be installed in Cali. or is Pete installing it?

dave96dcm 10-20-2011 06:05 AM
What happened? Is the car done?

Steve1968LS2 12-02-2011 10:26 AM
Making progress.. the body is looking good and we just mated the 416 LS3 stroker to the DSE subframe. Pete over at Comp Specialties is doing a killer job. Also bolted on the Hurst Driveline Conversion's TKO-600 and Centerforce clutch.

Lots of bodywork was needed, sort of slowed the project down, but it's moving much faster now.

http://i39.tinypic.com/5n97gy.jpg

tones2SS 12-05-2011 06:38 PM
Nice to see the update. I remember seeing this car in the shop before it was started. Can't wait to see the finished product!

Autokraft 12-05-2011 06:55 PM
Quote:
Originally Posted by Steve1968LS2 (Post 381793)
Making progress.. the body is looking good and we just mated the 416 LS3 stroker to the DSE subframe. Pete over at Comp Specialties is doing a killer job. Also bolted on the Hurst Driveline Conversion's TKO-600 and Centerforce clutch.

Lots of bodywork was needed, sort of slowed the project down, but it's moving much faster now.

http://i39.tinypic.com/5n97gy.jpg
Steve what brand headers are those?

Rybar 12-05-2011 10:13 PM
Thanks for the update Steve, I'm sure Nick is stoked :thumbsup:

waynieZ 12-07-2011 01:31 PM
Thanks for getting me in trouble! When I stood up after seeing this car porn my wife asked what I was looking at to get so excited. When I told her it was an engine I don't think she believed me. :drool:
That looks sweet!! Very nice guys.

syborg tt 12-07-2011 01:51 PM
Man that looks so nice.

Quote:
Originally Posted by Steve1968LS2 (Post 381793)
Making progress.. the body is looking good and we just mated the 416 LS3 stroker to the DSE subframe. Pete over at Comp Specialties is doing a killer job. Also bolted on the Hurst Driveline Conversion's TKO-600 and Centerforce clutch.

Lots of bodywork was needed, sort of slowed the project down, but it's moving much faster now.

http://i39.tinypic.com/5n97gy.jpg

Nick L 12-12-2011 11:48 PM
Quote:
Originally Posted by Autokraft (Post 382482)
Steve what brand headers are those?
Those are Lemons headers.

Nick


All times are GMT -7. The time now is 02:45 AM.
Page 14 of 17 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net