Thanks guys!

QUOTE=Jon Clough;334199]nice build, suscribed[/QUOTE]


Work your way from the rear door gaps to the front sheet metal... Align your doors, assemble the front sheet metal & square, make sure the sub-frame with bushings are the ones that will be used on final assembly with radiator support,& then start cutting away..
We completely re-did the front corners on the fenders.. lots of removing & re-install.. cutting grinding & measuring.. & most important of all "PATIENTENCE" .. It will come together..

I think I have told you guys before that when we design something & machine it .. We try to apply it in different applications.. The billet reservoirs have been a great item for us..

DSE Master cylinder with booster..

http://i1015.photobucket.com/albums/...n/IMG_0975.jpg

Wilwood master cylinder direct mount..

http://i1015.photobucket.com/albums/...n/IMG_0988.jpg

How about remote mount of the reservoirs!!

http://i1015.photobucket.com/albums/...n/IMG_0990.jpg

http://i1015.photobucket.com/albums/...n/IMG_0991.jpg


Here is another pulley we machined.. I think this will be the final one for this application.. Now we need to get the rest of the pulleys..

http://i1015.photobucket.com/albums/...n/IMG_0992.jpg

Cris, your gonna have to have a catalog for all your trick parts:thumbsup:

Outstanding work Cris, Top notch on the reservoirs. You planning on doing production on the pulleys also?

Looking very nice
Keep up the good work

Also looking if some of these are going to be available to the public.
Brake reservoirs or the ac bracket and pulleys

I am working on getting the parts side of the business up & running..

I don't know about doing pulleys yet.. I have to find a track system that works best for the LS conversions I am doing to justify the cost of doing pulleys..

Here is what the remote reservoir bracket for clutch will be looking like for the DSE master cylinder set up..

http://i1015.photobucket.com/albums/...irAssembly.jpg

Amazing work!

A/C Drier bracket & Fuel distribution block
 

This Firebird has been the best car here @ the shop for desgin & prototype components.. We got more coming...

A/C drier bracket for AutoRad Radiator support..

http://i1015.photobucket.com/albums/...n/IMG_1087.jpg

http://i1015.photobucket.com/albums/...n/IMG_1088.jpg

Fuel distrubution block for LS fuel rails & gage..

http://i1015.photobucket.com/albums/...n/IMG_1085.jpg

http://i1015.photobucket.com/albums/...n/IMG_1089.jpg

We got some hose clamps coming for fuel, A/C, & spark plugs in delrin in design..

Cris - many thanks for the time yesterday in your shop. Seeing all these parts in person was like a drug. I was f'n high the whole ride home!

Also, that MOI converstion I had w you and your friends from Wilwood was very cool; almost better than the time we spent on my stuff :lol:...it's nice to get inside industry engineering once in a while vs. chatting it up at an event!

Good to see that you enjoyed your visit Ron!

Dennis is one sharp mechanical engineer.. I have learned alot from him & keep discovering new things in our conversations with my other friend that visit on Saturday's..

Jay- The blocks are machined on inlet to -10 & the dual outlets to a -6 that are o-ringed or as Aeromotive would call ORB.. so the choices of buying fittings are open to your choice of fuel requirements.. This small qty. we ran are available to sell.. PM me in the next few days & will have pricing.. also will have pricing for the DSE master cylinder reservoir with insert..