Lateral-g Forums - IRONWORKS - 1967 Camaro with LT4, Forgeline's, Wilwood, Lots of new custom parts

Page 14 of 14

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - IRONWORKS - 1967 Camaro with LT4, Forgeline's, Wilwood, Lots of new custom parts (https://www.lateral-g.net/forums/showthread.php?t=52107)

WILWAXU

07-18-2017 07:38 AM

It's been fun watching this one come together. Great work!

CamaroAJ

07-18-2017 08:56 AM

Quote:

Originally Posted by ironworks (Post 662466)

We actually did not remove the cowl or fresh air vents from this car. Its a pretty standard Rain Gear wiper system install.

I meant since the rain gear is fitted from inside the car as the upper cowl has close out panels welded in, how did you keep water from running into the interior of the car? Looks like you made black plates that may have a gasket sandwiched in between?

ironworks

07-18-2017 09:02 AM

Quote:

Originally Posted by CamaroAJ (Post 662491)

We smoothed the cowl. I forget we had to remove the air passage to make enough room for the EPS, and ECU and all the other crap under the dash.

http://www.ironworksspeedandkustom.c...rod/prd510.htm

JON Q

07-18-2017 01:33 PM

Since the LT4 uses an electric power steering, how did you get it to work? Or did you use a hydraulic based version?

ironworks

07-18-2017 01:59 PM

Quote:

Originally Posted by SIXX (Post 662500)

Since the LT4 uses an electric power steering, how did you get it to work? Or did you use a hydraulic based version?

We went with electric power steering that was from Unisteer that used an ididit column.

JON Q

07-18-2017 04:16 PM

Quote:

Originally Posted by ironworks (Post 662501)

We went with electric power steering that was from Unisteer that used an ididit column.

Thank you!

All times are GMT -7. The time now is 08:13 AM.

Page 14 of 14

« First

Show 40 post(s) from this thread on one page