Lateral-g Forums - This is MY 67 Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - This is MY 67 Camaro (https://www.lateral-g.net/forums/showthread.php?t=34830)

So what’s the new part? The Core support?
That’s my guess at the problem...

Let me know if you need measurements for anything

JD

Your aftermarket front clip should have 2 locations for bolting up the front core support. The first location (closest to the firewall) should be for 67-68 camaro and Novas and the second location a few inches forward should be for a 69 Camaro. I think you just bolted the core support in the 69 Camaro location. I may be wrong but on my Chris alstons frame it has 2 locations to bolt up the core support. If that doesn’t work I would just bend the latch assembly since that’s what looks like is pushing the header panel forward that 1/2” or so.

Install your hood without the latch in place. I think you might find the header panel crown is low and once you get that right the latch will fit better. At least that is my recollection from the last time I dealt with this.

Don

Quote:

Originally Posted by WSSix (Post 699921)

Wish I could help with the hood latch. You've come a long way. The car is looking great! Keep up the good work.

Thanks, wished it was done already, lol!

Quote:

Originally Posted by JD67SS (Post 699927)

So what’s the new part? The Core support?
That’s my guess at the problem...

Let me know if you need measurements for anything

JD

Thanks JD, all the metal is GM except the AMD hood.

Quote:

Originally Posted by joeko23 (Post 699946)

Quote:

Originally Posted by dhutton (Post 699952)

Thanks for chiming in, I double-checked everything ... read - loosened all the bolts and doubled checked the fitment. The fender can't go back any further cuz the bolt by the hinges,

https://imagizer.imageshack.com/img922/5683/e06EY6.jpg

and the cowl and fender alignment is spot on

https://imagizer.imageshack.com/img922/7291/jRH10E.jpg

I aligned the AMD hood the best I can and the gaps seems ok, might need a little tweaking but overall not bad ...

https://imagizer.imageshack.com/img924/9237/EAtzfj.jpg

https://imagizer.imageshack.com/img923/9189/j4a1wh.jpg

https://imagizer.imageshack.com/img924/9861/vyFzha.jpg

https://imagizer.imageshack.com/img924/9677/k9OuTg.jpg

Seems silly but I started pushing the car by the radiator support and by golly it flexed quite a bit so I bolted the latch support loosely and pushed the latch into place ... hmmm, who would have thunk it!

More progress today ... my body man said to use a BFH and a piece of wood to get the AMD trunk lid to sit flat with the window panel. So I beat on her til she's pretty close to being flush with the front and the corners came up to meet the quarters, "winner winner, chicken dinner" :lol:

https://imagizer.imageshack.com/img922/8859/matILn.jpg

Thanks for chiming in and thanks for looking ....

I helped my friend rebuild a Jag, took the parts from another Jag, when the hood didn't line up, I held the one corner and he pulled and jerked the hood into position, laid 4x4 on there and pushed on the corners all while it was freshly painted!

Quote:

Originally Posted by Steve68 (Post 700029)

I know it's crazy how much the metal will move without distortion. Last week I would have told you that there is no way that latch would fit in that hole, but it did, guess GM knew what they were doing :smiley_smack:

Some fab work 1/26

Been overthinking an ECM / relay/fan controller mount ... so I just got some 22ga Al sheet and started fabbing something up that would fit in the passenger hole. I do thank Scott (SlowProgress) for his replies, I started thinking I could use the template he made ... but with the inners things were different.

So this is what I came up with, KISS, I will need to transfer dimensions to some thicker Al of course and use some rubber bushings to mount the fender side plate.

https://imagizer.imageshack.com/img921/6302/bnVuKa.jpg

https://imagizer.imageshack.com/img923/8901/dCzmTi.jpg

https://imagizer.imageshack.com/img922/6159/BFhAjc.jpg

Thanks for looking ...

Jeepers!!! I'm off Lat-G for like 5 min and you practically finish your car. I'm impressed with how far it's come and the level of detail. It's paying off HUGE!!!! Keep at it man!!

:captain:

Quote:

Originally Posted by Spiffav8 (Post 700245)

Jeepers!!! I'm off Lat-G for like 5 min and you practically finish your car. I'm impressed with how far it's come and the level of detail. It's paying off HUGE!!!! Keep at it man!!

:captain:

Thanks bunches, as Greg has always said: "Just pick up a tool and get something done!" :gitrdun:

That came out just as I envisioned .... don't know if that's good or bad, but it's mine and I did it.

Got my Mittler Bros 2" punch and flare die this evening, so why wait, right?

https://imagizer.imageshack.com/img922/5254/mcVFsl.jpg
Testing

https://imagizer.imageshack.com/img924/7167/PDe5cl.jpg
Layout the best I could, nothing fancy!

https://imagizer.imageshack.com/img923/87/MKY3RQ.jpg
Some Redneckery bench work, had to bend with a 1/4 radius ...

https://imagizer.imageshack.com/img921/4276/mNbP9e.jpg
Think it came out ok, still need to drill and mount stuff.

Gonna be a shame to cover this up with equipment, but it did strengthen the Al quite a bit.

Thanks for looking ...

That piece came out great. :cheers:

Daniel