Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Norwood (https://www.lateral-g.net/forums/showthread.php?t=36443)

Quote:

Originally Posted by protour73 (Post 489996)

I've thought of using spacers to raise the height of the gas pedal assembly......but I never pulled the trigger, this thread has inspired me to get back on that idea!!! :thankyou:

We did exactly that on TOW. By raising the gas pedal and dropping the brake pedal a little, we found a much better match on the gas/brake pedal heights. I was pretty unhappy with them at first also!

Nice job Sieg. :)

I did the same but your bracket looks nicer :catfight: Good job Mr Seig :flag2:

Quote:

Originally Posted by protour73 (Post 489996)

Are you kidding me? Pretty much the identical issue in the 2nd Gen as well. I searched a truckload of aftermarket pedal sets that don't solve the issue.

I did end up with a set of Modo Innovations pedals as they were the best looking. The biggest issue is the massive difference in height between the brake and gas pedals. I've thought of using spacers to raise the height of the gas pedal assembly......but I never pulled the trigger, this thread has inspired me to get back on that idea!!! :thankyou:

Great job Sieg, wonderful fabrication!!

Quote:

Originally Posted by carbuff (Post 490004)

Quote:

Originally Posted by intocarss (Post 490023)

I did the same but your bracket looks nicer :catfight: Good job Mr Seig :flag2:

Thanks Gentlemen :thumbsup:

You too Dawgy! :catfight: :D

Nice Job man! That's a great solution to a problem I wish we had. Drive-ability! Right now our drives like it is on rails! Wait a minute, it is on rails, 10" beams to be exact. :peepwall: :drowninga:

Quote:

Originally Posted by Sieg (Post 489989)

Thanks Dale.
I'm interested, limited time - early departure required, what time do you plan on getting there?

I am free on Wednesday so I can go early. Let me know what time works for you and I'll meet you there :sieg:

I'll buy you a Hefeweizen :cheers:

Quote:

Originally Posted by ccracin (Post 490031)

Nice Job man! That's a great solution to a problem I wish we had. Drive-ability! Right now our drives like it is on rails! Wait a minute, it is on rails, 10" beams to be exact. :peepwall: :drowninga:

Thanks Chad :thumbsup: I was thinking maybe I should make a few pedals...........dollies might be a better idea. :D

Quote:

Originally Posted by DaleTx (Post 490074)

I am free on Wednesday so I can go early. Let me know what time works for you and I'll meet you there :sieg:

I'll buy you a Hefeweizen :cheers:

Beer! What time do the gates open? I'd like to be heading south around 7 pm. :(

Quote:

Originally Posted by Sieg (Post 490078)

Beer! What time do the gates open? I'd like to be heading south around 7 pm. :(

Very cold Hefe'... with a lemon slice... :cheers: 3:30 pm Ok ?

Great job on the pedal Sieg. You might have to start putting those into production :thumbsup:

Quote:

Originally Posted by DaleTx (Post 490088)

Very cold Hefe'... with a lemon slice... :cheers: 3:30 pm Ok ?

That should work, I'll try to leave here around 12:45-1:00. :thumbsup:

Quote:

Originally Posted by Track Junky (Post 490155)

Great job on the pedal Sieg. You might have to start putting those into production :thumbsup:

I've been thinking.......
What's reasonable price range in your opinion?

All aluminum has potential, but pivot wear would need to be addressed.