|
Ring Brothers bumpers
Quote:
Thanks Kirk |
Hi Kirk,
I did have to massage the area at the quarter panel mount to flatten where the metal is raised at the bumper mounting hole. Basically, I sectioned the mount hump, flattened it, and re-drilled the hole. So putting the bumper on a finished car might mean modding the bumper instead. It is a really nice part. Ron Quote:
|
Fuel and brake lines run, console and shifter holes located, almost ready to stab engine!
https://sites.google.com/site/redfirecamaro/oct19-1.jpg https://sites.google.com/site/redfirecamaro/oct19-2.jpg |
Very Nice!
|
Quote:
|
Car is looking sweet! :captain:
|
Quote:
This setup would be close to the old DSE kit. The hole in the firewall needs to clearanced in a oval shape for the M/C boot. Links below: https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1 or https://www.summitracing.com/parts/ado-18m974/overview/ https://www.summitracing.com/parts/tff-2229nc https://www.summitracing.com/parts/tff-4750 https://www.summitracing.com/parts/dsr-050302/overview/ |
So I'm back at it and I've got the dash cluster loaded with Dakota Digital gauges. I used a heater delete panel and mounted my VA heater controls which I think turned out pretty good. I got the idea for mounting the BIMs on ABS from Mark S.
https://sites.google.com/site/redfirecamaro/2021-3.jpg https://sites.google.com/site/redfirecamaro/2021-1.jpg https://sites.google.com/site/redfirecamaro/2021-2.jpg https://sites.google.com/site/redfirecamaro/2021-4.jpg |
A couple pics of the dash wiring harness done, cluster installed with disconnects. Steering column, shifter, VA heater, and BIMs wired.
https://sites.google.com/site/redfirecamaro/2021-5.jpg https://sites.google.com/site/redfirecamaro/2021-6.jpg |
Glad you're back on it! Good luck with it.
|
| All times are GMT -7. The time now is 06:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net