As always Chris...amazing work. A question for you though with the distribution block. I haven't gotten around to running my fuel lines, and am really not sure about plumbing a fuel injected car...but just wondering if that works with a return line. Would that work with a Rick's tank with in tank pump? I thought I've read that a Rick's tank needs a return line that's why I'm asking as I like those blocks.

Great looking work and great looking fuel components Cris.:thumbsup:

Mike-
WE are currently using the Rick's tanks with the Vaporwoks trays that use the 2010 Camaro fuel module.. What I like about it is that it requires no fuel return system & can support about 600 hp..

Here is a pic with the Rick's gas tank with a return system that we used a Aeromotive fuel regulator to loop it back to the gas tank on the Firebird..

http://i1015.photobucket.com/albums/...IMG_0453-1.jpg

Thanks Tony!

WOW ! Those dis. blocks look real familiar ?

Cris,

What brand are those black AN fittings and hose? Does that hose have the Teflon liner?

That's a cool way to do that. Definitely saves having to run the extra line the entire length of the car. I'm going to save that picture that in my 'ways to do things' file. Thanks for posting that.

They might have some similarities to yours or other in the market.. but we make them to what we require here @ the shop.. For the most part it is easy for us to make any custom fitting or distribution blocks for fuel, brake, or A/C..

Erik- We use Summit brand fittings & hoses.. They are private label by one of the top manufactures of fittings & hoses.. We save a few bucks by using Summit brand fittings.. Custom plumbing can be expensive.. No teflon liner on the hose..

Good to see that it helped you Mike..

The Firebird has been getting a serious nose job!! It has been allot of work to get the lines as good as you see them in the pics.. got more coming! billet honey comb inserts that will bolt on to the orginal plastic headlight grills.. We even machined some mock up pcs...
The cold air box is almost complete.. Machine shop should have one more piece I need to complete it & mount it...

http://i1015.photobucket.com/albums/...n/IMG_1351.jpg

http://i1015.photobucket.com/albums/...n/IMG_1352.jpg

http://i1015.photobucket.com/albums/...n/IMG_1353.jpg

http://i1015.photobucket.com/albums/...n/IMG_1354.jpg

Wow Cris, super nice lines on that beak. I have seen & heard how hard it is to get those noses all dialed in. that one looks really good.

Another great job and car Cris. The cold air intake looks cool.