Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Transition Camaro (https://www.lateral-g.net/forums/showthread.php?t=41869)

MX145 07-17-2013 06:39 PM

1 Attachment(s)
Looks like Crystal Red is out. It's a nice color but the family is leaning toward Cyber Gray, Supersonic Blue or Night Race Blue/Berlin Blue. Here's Cyber Gray.

MX145 07-17-2013 06:40 PM

1 Attachment(s)
Supersonic Blue

MX145 07-17-2013 06:41 PM

1 Attachment(s)
Another Supersonic Blue picture.

Code510 07-17-2013 07:06 PM

I'm a fan of the gray, but that's the color of my car. The blue is pretty sharp as well. I vote for blue! :thumbsup:

MX145 07-17-2013 07:12 PM

Quote:

Originally Posted by Code510 (Post 493973)
I'm a fan of the gray, but that's the color of my car. The blue is pretty sharp as well. I vote for blue! :thumbsup:

Thanks for your input. Supersonic Blue or the Night Race Blue on the previous page?

MX145 07-17-2013 07:34 PM

1 Attachment(s)
Here's another Night Race Blue pic

MX145 07-19-2013 11:18 PM

1 Attachment(s)
I switched from ridetech to DSE JRi coilovers. The JRi's showed up the other day and fit right in the car. After looking over both brands they both do a great job on fit and finish. I can't say one is better than the other. Just a little different design.

MX145 07-19-2013 11:22 PM

1 Attachment(s)
JRi test fit in the car.

MX145 07-19-2013 11:31 PM

1 Attachment(s)
DSE sent me the coilovers for the speed kit front and quadralink rear. The rear springs are shorter and lighter weight rating. The rear coilovers are also a little different design with a bump stop on the shock shaft and a snap ring lock for the bottom spring holder. The fronts have a heavy duty o-ring instead of a snap ring. I also like the drilled rather than notch style spanner nut. It seems like it will look nice longer and not scratch as easily or get banged up from adjustments.

MX145 07-19-2013 11:34 PM

1 Attachment(s)
I started work on the support between both cross members on the subframe. I started with 2x3 rectangular tubing but it looked too massive so I cut the top off and tapered the front. My plan is for the angle to meet up right at the edge of the front cross member.


All times are GMT -7. The time now is 02:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net