Paul, did you paint your car blue?

I was wondering the same thing? Is that the same car?

Rick there is a place in Garland called Sentinel Plating that I took all my hardware and all my aftermarket parts that were gold zinc and had them clear cad just like that picture. Very reasonable.

You know what I found out (a buddy showed me) about Cad plating?? It buffs up just like chrome!!

Of course - Mark likes his stuff "stock" looking... but just thought I'd toss that in there in case anyone cared.

Yes we did, its the same car and I changed the interior up, I have a few pictures I need to load up on my laptop and ill post them up, I was really hoping to have it a Chicago Good-guys. but I had a really bad miss. and ended up being a bad MSD Pro-Billet Distributor. but it ended up working out because I have a couple things I want to sort out over the Winter like shocks and springs, rear gear change etc...

Paul

Paul it looks good...what color blue is it? Looks like LeMans?

The last Rick's tank I got for Charley's JA vent worked with no proplems. We just hooked up a 3/8 line to the vent on the tank and ran it to the back of the car.

Earlier tanks I had to move the vent to the filler neack of the tank to get it to the highest point in the tank.

Mark

Are you using a 4-point cage?

Is it going to have a backseat?

What will the uses of this car be?

Thanks

Mark I'm useing a stock tank with this Aeromotive sump http://www.jegs.com/i/Aeromotive/027...ductId=1137105 Could I put the vent in the fuel fill tube with a check valve ?

Thanks for the PM. Any other cars that you have done have 4-points??