Lateral-g Forums
Page 16 of 45 « First 61415 16 171826 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Ironworks to build the Chassisworks 1967 Camaro for Muscle Car Power Magazine (https://www.lateral-g.net/forums/showthread.php?t=21125)

Beach Cruiser 08-20-2009 10:11 AM
Quote:
Originally Posted by Serpa69 (Post 230147)
There is a track day where you can actually run at VIR on Sep 7,8 I will be there. That track is better in person.

I hope someone doesnt think that is where you fill the car up with gas. That would suck
What are you driving?

markd 08-20-2009 11:18 AM
Rodger,

Do you have clearance issues with the 295 / 35 front tires?

I also have a Chassisworks sub-frame and I am having clearance issues. I have 9” x 18” wheels and 245 / 40 tires. The tires are rubbing the frame, fenders and inner fenders when you turn the wheels.

Any suggestions?

Thanks,

Mark

BeCool68 08-20-2009 02:45 PM
very nice!

ironworks 08-25-2009 02:26 PM
We built and installed the Air Intake plumbing this morning with 3 90 degree 3.5" bends. The Air filter from K&N fit like a glove.

http://i616.photobucket.com/albums/t...ust2009209.jpg

1969x11 08-25-2009 04:34 PM
Where did you order the bends from? SPD? I really need to do this to my car, I have a rubber 90 then MAF with a K&N stuck on the end. Just pull that one off and send it to your old Alabama pal !!!! :lol:

tones2SS 08-25-2009 06:13 PM
Quote:
Originally Posted by 1969x11 (Post 231231)
Where did you order the bends from? SPD? I really need to do this to my car, I have a rubber 90 then MAF with a K&N stuck on the end. Just pull that one off and send it to your old Alabama pal !!!! :lol:
I think Rodger and crew built it.

ironworks 08-25-2009 06:58 PM
Quote:
Originally Posted by 1969x11 (Post 231231)
Where did you order the bends from? SPD? I really need to do this to my car, I have a rubber 90 then MAF with a K&N stuck on the end. Just pull that one off and send it to your old Alabama pal !!!! :lol:
Kevin, I got the bends from treadstone aluminum somewhere near you.


Talk to ya soon

Rodger

ironworks 08-27-2009 12:49 PM
Well our Speedtech switch panel finally cleared customs and arrived this morning. From my Days of Drag racing I remembered a company from Canada that made a really nice switch panel, that was set up with some self diagnosis features that could come in handy on the side of the road or the track. The switch panel connects through a Axial cable like your computer uses. All you do is hook up the power source to the relay panel and route your power wires to the components your running.

www.speedwiresystems.com

http://i616.photobucket.com/albums/t...ust2009237.jpg

http://i616.photobucket.com/albums/t...ust2009238.jpg

Enjoy

awr68 08-27-2009 04:17 PM
Looks like a nice piece! Where will you be mounting it?

ironworks 08-27-2009 04:35 PM
Probably just the rollcage halo.


All times are GMT -7. The time now is 11:02 PM.
Page 16 of 45 « First 61415 16 171826 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net