It's Mr. Clueless to you sir, LOL.

G that's a buddy of mine who owns HM racing Design. They specialize in $500,000 trophy trucks. He lets the boys use the shop for the stuff they can't do at home.

I thought you'd like the wheel.

Very nice work! Good luck getting ti done for SEMA!

Thanks Trey, it's a lot of work, so they will need all the luck they can get!


Here a quickie of the firewall bezel, the carbon is going to get tone down will a mat finish. We used the factory hood as a test panel. That's going to be the color of the engine bay, floor and trunk.


Justin counter sunk all the holes with a hand held drill!

Attachment 41857


Attachment 41858


Attachment 41859

Very Nice!

that is Awesome !!!

Where did you guys get the Carbon Fiber sheets as I need a couple sheets.

Thnaks Wayne!

Thanks Marty, I think one sheet is all you'll need as they come in 4' by 8'. Speak with KC at APR Performance Inc. Tel (909) 594-3796

and thank you

Well, cars is off to paint. There is no kidding, over 10 days of skimming, sanding and primer in the engine bay. They even skimmed the inside of the fire wall were the filler panel was welded in. There more hours in the trunk than I can count. Every single spot weld has been smooth.

The boys are thinking of going with the same color as the Z/28 concept. What do you guys think?

http://i1231.photobucket.com/albums/...ps11bfcdc3.jpg

It will look Awesome if thet choose this color.

Pearl white mat would look really cool, but remember to keep your hands VERY clear or always wear gloves if you plan on touching the car!! It will show every little touch to the car!