I did some digging around on the ZL1 Camaro site and found my engine listed in the Registry.......after digging some more I found some pictures of the car as delivered that were posted by the original owner.............Pretty Neat!!!


http://i13.photobucket.com/albums/a2...evelle/zl1.jpg


http://i13.photobucket.com/albums/a2...evelle/zl2.jpg


http://i13.photobucket.com/albums/a2...evelle/zl3.jpg


http://i13.photobucket.com/albums/a2...evelle/zl4.jpg

Very nice build. I'm enjoying watching it all unfold and your detailed photos. I can't wait to see the final results. Thanks!

sweet overall build nothing but quality

Awesome build. I did not read the whole thing but I assume the donor car bit the dust?

Yep!!......Pretty sure it was a Roll over...

After getting most of the Engine compartment "Stuff" hooked up.......I got the Intercooler system filled and Bled.....So I decided to install the rest of the sheet metal so I can get the ECM and forward wiring system installed.......Starting to look like a car again...........


http://i13.photobucket.com/albums/a2...ps15754641.jpg


http://i13.photobucket.com/albums/a2...ps9bbda19f.jpg


http://i13.photobucket.com/albums/a2...ps6ca202f6.jpg


http://i13.photobucket.com/albums/a2...ps74a5ee57.jpg

Been watching this but have yet to post....Looks great Ken! What a cool car this is going to be. Keep up the great work!

Got all the sheet metal installed and finish bolted in......Got the front Bumper back on and I also got the ECM and Trans Modules installed......Forward Lamp harness is next along the getting the Intercooler pump wired.......Now......I just need to find my Horns......they are here somewhere.......Dammmm!!!


http://i13.photobucket.com/albums/a2...psdfe3937a.jpg


http://i13.photobucket.com/albums/a2...ps50588252.jpg


http://i13.photobucket.com/albums/a2...ps94ff23d0.jpg

Don't forget that lower radiator hose!


Looks good Ken!


This thing is moving along pretty fast! Good to see!

First off......I would like to thank the person who brought my horns back and put them in the garage on the table in plain view........Thanks........

Now.....I got that mess of wires all cleared up in the front of the car.......I hooked up a temporary power feed and checked out the lights.........They actually worked......LOL........I bought an American Autowire Classic update wiring kit and they have anticipated any combination of options and or Gauge/Engine options......I was intimidated by the amount of wires and circuits in the beginning.....but......after looking at what I really needed to hook up....I started removing wires from the bulkhead .......Example.......with the Speartech LS harness, most everything is taken care of in that harness.....blending it into the system is as simple as a fuel pump lead a couple of grounds and keyed ignition power and Battery........That's about it......The Auto engine harness had a bunch of wires in it.....I ended up using 4 wires.....one for the Solenoid and three for the windshield wiper/ Pump assy.......The forward lamp harness was about as simple....about the only major thing I have left to do is tackle the inside.......That's next.....Hopefully the wheels and tires will show up soon also.......


http://i13.photobucket.com/albums/a2...psdaea00f8.jpg


http://i13.photobucket.com/albums/a2...ps33a95b74.jpg


http://i13.photobucket.com/albums/a2...ps3afb9e09.jpg


http://i13.photobucket.com/albums/a2...psbd2151c3.jpg


http://i13.photobucket.com/albums/a2...psfe02a57c.jpg


http://i13.photobucket.com/albums/a2...ps2f791d06.jpg