|
Fan Relay 05-15-21
I removed the old wiring for the fan and installed a painless relay set up. Eventually this will come out and I will install the PWM setup.
http://www.garagescene.net/_data/i/u...5f0e5b8-me.jpg http://www.garagescene.net/_data/i/u...4a62d64-me.jpg I need to figure out the location for the relay. http://www.garagescene.net/_data/i/u...d91c3fe-me.jpg This looks like the perfect location. http://www.garagescene.net/_data/i/u...abe2efb-me.jpg http://www.garagescene.net/_data/i/u...4cf72e4-me.jpg The black screw is the ground stud. http://www.garagescene.net/_data/i/u...2fab0ac-me.jpg http://www.garagescene.net/_data/i/u...44602a6-me.jpg Wiring is all hidden nicely behind the battery http://www.garagescene.net/_data/i/u...171d55e-me.jpg Remy Picture http://www.garagescene.net/_data/i/u...065faad-me.jpg Routing the wires over to the fan where I will install a weather pack connector. |
Making things looks pretty (05-16-21)
Time to wrap the wires
http://www.garagescene.net/_data/i/u...b711178-me.jpg http://www.garagescene.net/_data/i/u...ff098d2-me.jpg Breakfast & Relay http://www.garagescene.net/_data/i/u...a7b8f66-me.jpg http://www.garagescene.net/_data/i/u...5b986a6-me.jpg http://www.garagescene.net/_data/i/u...29a115d-me.jpg http://www.garagescene.net/_data/i/u...fa1543c-me.jpg While I here I sketched out my wiring plan/diagram. http://www.garagescene.net/_data/i/u...d0d2732-me.jpg Of Course I will be using an Optima battery since the billet battery tray Ron & I designed for the 2nd Gen Camaro's. http://www.garagescene.net/_data/i/u...f1ebfd5-me.jpg more stuff !!! http://www.garagescene.net/_data/i/u...82871a8-me.jpg |
I really really thought the car would make it out this year (05-17-21)
So my plan was to have the car completed for the Hot Rod Power Tour.
However, that didn't happen but the good news is I did buy the tires and plan to have them mounted soon. http://www.garagescene.net/_data/i/u...7dc4516-me.jpg Jumping back on the brakes or should I say "Circling Back". I needed to stop this bracket from twisting when I turn the wheel http://www.garagescene.net/_data/i/u...6593733-me.jpg Step One - Dill second hole in the bracket. http://www.garagescene.net/_data/i/u...f2832a8-me.jpg Step Two - Tap said hole. http://www.garagescene.net/_data/i/u...49fc8e7-me.jpg Step Three - Drill second hole in frame. http://www.garagescene.net/_data/i/u...b4d6590-me.jpg Step Four - Mount bracket using the ARP bolt and then thread in the smaller bolt so it acts like a stud in the bracket. That way if the small bolt breaks all I have to do is replace it. I also don't have to worry about breaking a small tap in the frame as I have done that some many times in the past that I no longer trust myself. http://www.garagescene.net/_data/i/u...170e170-me.jpg Step Five - Rinse and Repeat on the Drivers Side http://www.garagescene.net/_data/i/u...af2fdb4-me.jpg http://www.garagescene.net/_data/i/u...8f47f3b-me.jpg Yahoo I get to use my Right Hand Drill http://www.garagescene.net/_data/i/u...fdc2d60-me.jpg http://www.garagescene.net/_data/i/u...b0752ad-me.jpg http://www.garagescene.net/_data/i/u...b6e2bf4-me.jpg http://www.garagescene.net/_data/i/u...f8e0750-me.jpg http://www.garagescene.net/_data/i/u...f42e596-me.jpg |
Adding a Weather-Pack to the Fan (05-23-21)
Upgrading the wire connectors to a weather-pack connector.
http://www.garagescene.net/_data/i/u...2436912-me.jpg http://www.garagescene.net/_data/i/u...f3efe44-me.jpg I started using a X-Acto hot knife to cut the Tech-Flex wire sleeve. It works good and if you accidently cut yourself it also singes your skin so you don't have to worry about bleeding or needing a band-aid. http://www.garagescene.net/_data/i/u...94641b0-me.jpg http://www.garagescene.net/_data/i/u...9f3586d-me.jpg |
2 Attachment(s)
Quote:
|
That's a great idea and what really sucks is I have the tool.
Da !!!! Quote:
|
2 Attachment(s)
I've followed along at times and used some of your wiring techniques which has helped me, thanks for that. For my fan relays I decided to put them into a enclosure to protect from the elements just in case. One like this that fits both.
https://secure.sayal.com/STORE2/View_SHOP.php?SKU=14898 Then decided to grab this one of which I'll alter to fit down the road. https://www.amazon.ca/gp/product/B07...0?ie=UTF8&th=1 Also fabbed up a panel into the front fender area so that I wouldn't clutter up the battery area with a bunch of wires. Also used 2 battery terminal blocks as extended power points. Rivnut tool came in handy here! |
1 Attachment(s)
Hi Simon,
Thank you Thank you Looking back I should have used the waterproof relay, which means I will most likely order the waterproof relay kit and redo this next week unless Amazon can get it to me tomorrow. https://www.summitracing.com/parts/prf-30130 Quote:
|
Holley Dash Wiring, Yes there is more (05-30-21)
Moving on to the Holley Digital Dash
http://www.garagescene.net/_data/i/u...5971cc5-me.jpg http://www.garagescene.net/_data/i/u...c0ce7c8-me.jpg http://www.garagescene.net/_data/i/u...23b0756-me.jpg Connected and routed the wires so the Vintage Air unit it once again will go back in. http://www.garagescene.net/_data/i/u...fbe9cdd-me.jpg |
| All times are GMT -7. The time now is 01:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net