Blair 11090 - Blair Equipment Rotabroach Cutter Kits
 

Thank you Thank you.

I just added it to my Summit Racing Shopping cart

Blair 11090 - Blair Equipment Rotabroach Cutter Kits
https://www.summitracing.com/parts/brc-11090

http://shop.blairequipment.com/Fract...it-p/11090.htm

For half that money harbor freight step drills.

This
https://www.harborfreight.com/2-piec...lls-96275.html

Plus this

https://www.harborfreight.com/3-piec...lls-91616.html

gets you a wider range of hole size, automatic hole deburring, no fear of walking off the center punch like the blairs do, and the smaller sizes clip into impact drivers like my Milwaukee M12 90* driver and can get is some tight places. I like the Blair cutter in a drill press, though.

Either is better than a drill bit. Drill bits don't drill round holes and are just nasty on sheet metal.

RotaBroaches and HF.
 

Donny is on the money. :cheers:

HarborFreight step drills are bullet proof.....I'm ten years into them as a full time fabricator. Deburring for free, all sizes in one handful, and ROUND holes. I'm sure Wurth and SnapOff are made in the same factory but six times the price.

YES....RotaBroaches in DRILL PRESS or MILLING MACHINE ONLY! They work great in a lathe too but be careful it doesn't jam. Careful the swarf comes off in all directions (not one direction like lathe tool).

X3 on the harbor freight step drills. It's one of a few things they sell that works, lol

I'm a fan of Blair hole saws too - or Milwaukie hole saws. None of the rest seem to last.

cute pup

Thank You Thank You

I love this forum and I am off to Harbor Freight & might as well get some Taco's since it it right down the street.

My OCD Got The Best of Me (06-13-21)
 

So I just don't like how the wire look coming out of the firewall so here we go again.

The tape is coming off and more to come later on the wire harness

http://www.garagescene.net/_data/i/u...098b235-me.jpg

http://www.garagescene.net/_data/i/u...23312e0-me.jpg

http://www.garagescene.net/_data/i/u...012c8bd-me.jpg


A couple more notes.

http://www.garagescene.net/_data/i/u...5336280-me.jpg

Took a Couple Days Off and a Good Friend Stopped by Today (06-19-21)
 

At some point I removed the Tech-Flex wire wrap to expose the wires so I could run them in the direction I wanted them to go.

http://www.garagescene.net/_data/i/u...e16a669-me.jpg

http://www.garagescene.net/_data/i/u...5abb1f5-me.jpg

http://www.garagescene.net/_data/i/u...7c75efe-me.jpg

While we are here I might as well remove the wire's that I will not need.

http://www.garagescene.net/_data/i/u...39eba0d-me.jpg

http://www.garagescene.net/_data/i/u...ceae588-me.jpg

Twist ties are your friend when doing small projects like this.

http://www.garagescene.net/_data/i/u...7ee06b5-me.jpg

I also pulled out the Holley Dash and the Classic Dash Insert.

http://www.garagescene.net/_data/i/u...a931b49-me.jpg

I also re-wrapped the wire loom.

http://www.garagescene.net/_data/i/u...2dbf270-me.jpg

http://www.garagescene.net/_data/i/u...46383ec-me.jpg

Here is the part description for the small firewall grommet that I used on the DBW Pedal and the Vacuum hose.

http://www.garagescene.net/_data/i/u...781791a-me.jpg


Since I had a second person I could finally/temporally install the drive by wire pedal bracket.

http://www.garagescene.net/_data/i/u...df113c4-me.jpg

http://www.garagescene.net/_data/i/u...fb24548-me.jpg

Lower Dash Bracket (06-19-21)
 

Quick stop at O'Reilly's Autoparts for some vacuum hose which will be getting installed soon.

http://www.garagescene.net/_data/i/u...88cd824-me.jpg

http://www.garagescene.net/_data/i/u...9457428-me.jpg

At some point I need to mock up the fitting that go under the manifold.

http://www.garagescene.net/_data/i/u...f0c7bf8-me.jpg

Lower Dash Brackets have been located and now it is time to finally install them. I hope the ECU wires don't run into this bracket.

http://www.garagescene.net/_data/i/u...54655d6-me.jpg

http://www.garagescene.net/_data/i/u...1d93080-me.jpg

http://www.garagescene.net/_data/i/u...3e28604-me.jpg

http://www.garagescene.net/_data/i/u...f932b02-me.jpg

http://www.garagescene.net/_data/i/u...17fef7d-me.jpg

Holley ECU Wiring, Yes there is more !! ( 06-22-21 )
 

So does anyone have the module to the DSE Wiper Harness as mine seems to be missing.

http://www.garagescene.net/_data/i/u...bd428e7-me.jpg

Running more wires over to the passenger side kick panel.

http://www.garagescene.net/_data/i/u...02fe69e-me.jpg

http://www.garagescene.net/_data/i/u...98ba497-me.jpg

http://www.garagescene.net/_data/i/u...e21705b-me.jpg

Made another hole for the wires.

http://www.garagescene.net/_data/i/u...79bd0bb-me.jpg

http://www.garagescene.net/_data/i/u...c2a2535-me.jpg

Since I had room I moved the ECU up about an inch.

http://www.garagescene.net/_data/i/u...8aa1c15-me.jpg