Lateral-g Forums
Page 17 of 29 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   Floater setup--yes or no (https://www.lateral-g.net/forums/showthread.php?t=35068)

fleet 01-27-2012 07:16 PM
Quote:
Originally Posted by DFRESH (Post 392215)
In the end, it was Todd's post where he said "Dayummmm---that is nice" that did it for me. I just want his acceptance.
Being honest about your feelings is the first step to recovery Dub. :thumbsup:

Sieg 01-27-2012 07:27 PM
Quote:
Originally Posted by DFRESH (Post 392215)
I've had a lot of conversations these past two weeks on this topic. Thanks to Payton for giving up watching the X-Games to chat with me late into the night, and for all of you who have posted! In the end, it was Todd's post where he said "Dayummmm---that is nice" that did it for me. I just want his acceptence.

After much debating and searching, I have ended up with the new Speedtech Chicane 9" --accompanied by their torque arm setup.

It was the free shipping to RTTC in March---you know me.

Blake, thank you very much!! Fed Ex going out tomorrow to you--


Doug
Good for you Doug! Blake and Speedtech are a real asset to Lat-G and work hard to earn the business, like numerous other Lat-G supporting vendors. Lat-G is a great example of the potential value forums posess for members and supporting vendors. :thumbsup: :lateral:

Vendors - Your support is Appreciated!

Roadbuster 01-27-2012 07:45 PM
Quote:
Originally Posted by DFRESH (Post 392215)
I've had a lot of conversations these past two weeks on this topic. Thanks to Payton for giving up watching the X-Games to chat with me late into the night, and for all of you who have posted! In the end, it was Todd's post where he said "Dayummmm---that is nice" that did it for me. I just want his acceptence.

After much debating and searching, I have ended up with the new Speedtech Chicane 9" --accompanied by their torque arm setup.

It was the free shipping to RTTC in March---you know me.

Blake, thank you very much!! Fed Ex going out tomorrow to you--


Doug
Sounds like you got a neat setup with this one!

KPC67 01-27-2012 07:47 PM
Quote:
Originally Posted by Ron in SoCal (Post 392203)
Blake I get why you're limiting the floater to a complete kit, it just strikes me that you maybe limiting your potential customer base (all the guys drooling in this thread - including me - who already have complete rear ends) by only offering it this way. What are your thoughts on a speedtech 'certified' installer program? There's lots of guys out there like Speedway, Currie and others that certainly have the jigs and skills to ensure proper alignment. Just a thought...:yes:
I have to agree with Ron here, I would be jumping all over this if I could retro fit it to the 9" I just purchased from DSE. I am not in the position to buy a whole new housing, and I doubt mine would sell due to the custom width I ordered it in.
That being said it is a nice piece.

Vegas69 01-27-2012 08:15 PM
About time you were the guinea pig buddy. :unibrow: You are making some great decisions. :thumbsup:

skatinjay27 01-28-2012 12:01 AM
knowing doug im sure he worked in the "free t-shirts for the whole family or no deal" haha :lol:

Flash68 01-28-2012 01:33 AM
Doug E. Fresh.... the man who spends umpteen thousands of dollars on bad ass bulletproof parts to put behind, under and in front of.... his 220 horsepower motor with a flex fan and no tach. :thumbsup:

Quote:
Originally Posted by DFRESH (Post 392215)
In the end, it was Todd's post where he said "Dayummmm---that is nice" that did it for me. I just want his acceptence.


Doug
We all do, Doug..... we all do. :willy:

Bad94 01-28-2012 05:53 AM
Quote:
Originally Posted by KPC67 (Post 392221)
I have to agree with Ron here, I would be jumping all over this if I could retro fit it to the 9" I just purchased from DSE. I am not in the position to buy a whole new housing, and I doubt mine would sell due to the custom width I ordered it in.
That being said it is a nice piece.

I pmed blake, about the same thing.

I would buy a kit right now if i could, I dont need or want a new housing, Im not going to spend $4000 plus on a rear end again.

I have all the rear end narrowing stuff, i have done them before.


Not selling this as a kit is going to be the only problem. Other then that, looks killer and a super cool set up.

DFRESH 01-28-2012 07:03 AM
Quote:
Originally Posted by skatinjay27 (Post 392241)
knowing doug im sure he worked in the "free t-shirts for the whole family or no deal" haha :lol:
Oops, yeah--that's right---I forgot to mention that the front subframe came with it also--but I had to pay for the T-shirt----Blake is a tough businessman.

DFRESH 01-28-2012 07:14 AM
Quote:
Originally Posted by Flash68 (Post 392242)
Doug E. Fresh.... the man who spends umpteen thousands of dollars on bad ass bulletproof parts to put behind, under and in front of.... his 220 horsepower motor with a flex fan and no tach. :thumbsup:



We all do, Doug..... we all do. :willy:
Dude, I told you, I added the 1.6 rockers to the motor---picked up 3 RWHP--the cam has a total lift of 420 now--when you pull the valve covers and the motor is running, you can actually see the rocker move occasionally---wait till you here it now--it doesn't even sound like the same car-It now has to idle at 300 rpm to get rid of the heavy chop and to have some vacume for the brakes. I have to put it in neutral at every stop light now.

Ironworks now makes a "Camshaft Floater" ---i'm going to do that next.--

D


All times are GMT -7. The time now is 05:03 AM.
Page 17 of 29 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net