Lateral-g Forums
Page 18 of 159 « First 81617 18 19202868118 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   This is MY 67 Camaro (https://www.lateral-g.net/forums/showthread.php?t=34830)

Sonar Chief 04-03-2012 08:29 PM
Update 4/3
 
Well I'm glad I didn't put away the heater, it was snowing this morning and I needed it tonite in the garage. Finished the quarter panels and did both door jambs. While I was removing the paint on the rocker panel I came across a hole?:( I think while I was discing the hole came through, there is a repair I need to do - glad I found it now!

http://img338.imageshack.us/img338/3228/120403213.jpg
Cleaned both door jambs
http://img441.imageshack.us/img441/555/120403212.jpg
Hole that needs attention :mad:
http://img405.imageshack.us/img405/7194/120403215.jpg
My Great Dane came out to see what I'd been doing all nite.

More to follow .... thanks!

makoshark 04-03-2012 08:36 PM
Is your car an RS?

Sonar Chief 04-03-2012 08:45 PM
Quote:
Originally Posted by makoshark (Post 405354)
Is your car an RS?
No, but the front fenders are NOS RS fenders, I'll have to modify them a little :thumbsup:

orangevert 04-03-2012 08:48 PM
SonarChief do you need a rotisserie?

The car is looking good, Lots of great metal work.

Thanks Kirk

makoshark 04-03-2012 08:49 PM
Quote:
Originally Posted by Sonar Chief (Post 405355)
No, but the front fenders are NOS RS fenders, I'll have to modify them a little :thumbsup:
Don't wanna run the RS setup? I love the RS grill look, but I understand not everyone does.

Sonar Chief 04-03-2012 09:02 PM
Quote:
Originally Posted by orangevert (Post 405356)
SonarChief do you need a rotisserie?

The car is looking good, Lots of great metal work.

Thanks Kirk
Kirk ... eventually I'll need one. Do you have one?
I have to build a frame jig first and weld the cowl and the tubs in first and then she'll be ready for a rotisserie to do the underside.

Sonar Chief 04-03-2012 09:04 PM
Quote:
Originally Posted by makoshark (Post 405358)
Don't wanna run the RS setup? I love the RS grill look, but I understand not everyone does.
I think I like the non RS version better, steady the course :thumbsup:

orangevert 04-04-2012 07:11 PM
Quote:
Originally Posted by Sonar Chief (Post 405371)
Kirk ... eventually I'll need one. Do you have one?
I have to build a frame jig first and weld the cowl and the tubs in first and then she'll be ready for a rotisserie to do the underside.
Yes, If i have it when you need it PM and if you want to drive to Denver you can use it.

Kirk

Sonar Chief 04-06-2012 04:52 PM
Door looking better
 
Quote:
Originally Posted by orangevert (Post 405540)
Yes, If i have it when you need it PM and if you want to drive to Denver you can use it.

Kirk
Kirk ...PM sent.

Scuffed the POR15 and put two coats chassis black on the drivers door, came out great :thumbsup: I'm glad I took the skin off and refinished the inside ... don't have to worry about rust no more.
Hey is some car porn!

http://img814.imageshack.us/img814/8531/120406228.jpg
Looking better!
http://img803.imageshack.us/img803/5959/120406230.jpg
Nice sheen and protected from rusting :thumbsup:

Thanks for looking, I'm out to patch that hole in the rocker panel.

Sonar Chief 04-06-2012 09:41 PM
Garage time ...
 
Nothing special just patched the rocker panel hole, still need to finish it tomorrow, that's another day.

Patched the hole :thumbsup: http://img696.imageshack.us/img696/237/120406233.jpg

Thanks for looking!


All times are GMT -7. The time now is 01:00 AM.
Page 18 of 159 « First 81617 18 19202868118 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net