thanks Wayne hope your coming out of the deep freeze and are able to get out and play with your new toys!

Thanks for the compliment I am just learning as i go so it is going to take a bit of time.

well time is just flying by and this project has taking on a life of it's own! why do I continue to make things so complicated.??? this frame design has changed thanks to reading some pages from Ron Sutton and his wisdom of tuning suspension. I decided to do a 3 link and a watts link to make it a bit more adjustable too! I don't know anything I am just making this up as I go!
http://i643.photobucket.com/albums/u...psppjxqrj7.jpg
http://i643.photobucket.com/albums/u...ps0usf4yj8.jpg
http://i643.photobucket.com/albums/u...psfttgyfvr.jpg
http://i643.photobucket.com/albums/u...psx1dghwze.jpg

There is project creep and now we need a new name for the project _ _ _ _ _ redesign

Great ingenuity and fabrication on this build. If all this cool custom work was easy, then everyone would do it, and it wouldn't be cool or custom anymore. Your car will be unique and bad @ss when it's done. Keep it up.

LOL. Marty your are right there it just went from simple mods to all out custom everything! I never claimed to be smart!:lostmarbles:

Thanks for the kind words .I hope your right and all this effort will be worth it in the long run!

making progress! not fast progress but still making progress non the less..um well sometimes anyways, going backwards is sometimes a part of the game too!

http://i643.photobucket.com/albums/u...pspyhswamo.jpg

http://i643.photobucket.com/albums/u...psmarfwrhh.jpg

http://i643.photobucket.com/albums/u...psgmgv91ey.jpg

http://i643.photobucket.com/albums/u...psealiav5c.jpg

Great update !!!

Looking great Eric!
You should be able to fit some serious rubber under the rear of that car.

thanks Marty! it has been a bumpy road but i feel all in all we are making progress and learning a ton in the process.!

I hope your right! looking for room to stuff the 335 20's under the wheel wells. there was definitely easier ways to do this ! i never claimed to be smart though!

This is a small example of how stupid I can be at times! this pict. is from a couple of years ago pulled a ford 9" out from behind the garage and cut all the brackets off to make it fit in the chevelle chassis after more fitting found out the pinion was offset 2" so it was not going to work! ended up ordering a new rear from Moser with all the brackets welded on to fit s a direct bolt in! sweet right? http://i643.photobucket.com/albums/u...ps53a4b1b4.jpg

fast forward to present time. lets cut the brackets off the rear to make a custom 3 link and lets make a custom frame as long as were at it!:hairpullout:
http://i643.photobucket.com/albums/u...ps5m9zoyfd.jpg
http://i643.photobucket.com/albums/u...psqdzfbinf.jpg