Rear spoiler fitment.

https://i.postimg.cc/KvKnF22P/8764-E...4-F98137-C.jpg

https://i.postimg.cc/SQ1WwKwQ/D88025...-A88268-CB.jpg

https://i.postimg.cc/T1sgmkr5/44-A03...AD400678-A.jpg

Coming along nicely! Keep up the good work.

I really like the spoiler,is that from Kindigit?

Thanks.

Yes it is. It is their carbon fiber one piece spoiler they sell. The gaps were just not good enough. It would have snugged down tight with the bolts but then it was messing up the deck lid gaps. CF does not flex hardly. In addition the gap where the spoiler met the deck lid was not as tight as I would like it to be. We extended the deck lid to minimize the gap so no having that with the spoiler. So now it is a three piece spoiler with some twists.

https://i.postimg.cc/pLrQH5D0/D5-B06...-E3-F8-F82.jpg

https://i.postimg.cc/Nfp8Skr9/DB0016...DF9-B22-FA.jpg

I seem to have a habit of hacking up expensive carbon fiber pieces because I don't like the fit. I guess that is what makes a custom build vs just a bolt on build.

https://i.postimg.cc/Y00Qvcmw/0-A6-C...-E757-FC14.jpg

Very nice work,I like it:thumbsup::thumbsup:

Looking good, nice work.

After hours of blocking it is ready for another coat of poly. The rockers came out great.

https://i.postimg.cc/JhzcgWgV/673568...9-CF32-F95.jpg

https://i.postimg.cc/rF5JRjWb/036-C2...-C05-EACBB.jpg

https://i.postimg.cc/qvLxj71x/8-DAD6...-C9-AC0697.jpg

https://i.postimg.cc/L8RVtP3s/E0-FDD...EC63-A94-D.jpg

What is your plan for opening the trunk?

It will be electrical powered soft close but we are still weighing a couple ideas on execution. Will have a manual release if ever needed as well.

Recessed the battery tray. Just needs finished out.

https://i.postimg.cc/YSRDRdZn/9-F61-...-DAFC9-ED6.jpg

https://i.postimg.cc/nLpwqyR9/23-BF3...C3-B60-D81.jpg

https://i.postimg.cc/c4dm9R7P/B5-AA5...84607539-A.jpg