Thanks! I had it running on a test stand prior to this. However, this is the first time hearing it with the exhaust. :D

Me too! Cel phone viewing sucks!

Thanks Trey!

So I just finished building a cold air box. It turned out decent enough considering I don't weld aluminum very often. :welder:

https://live.staticflickr.com/65535/...e3974360_b.jpg20200818_194028 by Yelcamino, on Flickr

https://live.staticflickr.com/65535/...fc855541_h.jpg20200817_205629 by Yelcamino, on Flickr

https://live.staticflickr.com/65535/...32ee3612_b.jpg20200817_195743 by Yelcamino, on Flickr

At the bottom of the box are five small holes. There is another piece that will be riveted in place once the box is installed to stay. The piece will close the gap at the bottom.

https://live.staticflickr.com/65535/...1b0dec5e_b.jpg20200817_195722 by Yelcamino, on Flickr

Air will come in through holes in the core support just to the side of the radiator opening and also from around the headlights. I still need to drill the holes but I'll do that before I take it to powder coat.

https://live.staticflickr.com/65535/...fbd295b0_b.jpg20200709_181512 by Yelcamino, on Flickr

The other day I put the hood on to make sure the air box cleared (plenty of room) and then rolled it outside for some current pics and video...

https://live.staticflickr.com/65535/...572f0040_b.jpg10143 by Yelcamino, on Flickr

https://live.staticflickr.com/65535/...82850776_b.jpg10144 by Yelcamino, on Flickr

Then I brought Yelcamino around so they could get reacquainted!

https://live.staticflickr.com/65535/...ba65ce74_b.jpg10146 by Yelcamino, on Flickr

I haven't done any actual measurements, but side by side, I think the Chevelle is a tad lower...

https://live.staticflickr.com/65535/...69313785_b.jpg10145 by Yelcamino, on Flickr

And with special thanks to Andrew for the awesome Holley EFI tune he provided, she sounds awesome!

Nice and the engine sounds awesome.

You are at the fun time of the build now Herb, when all of the work starts to pay off!! Looks and sounds great!!

That's badass!!!!!!

Herb,

I am really looking forward to doing more tuning. The idle sounds amazing and given the size of the cam, it is idling very smoothly. It should be a beast!

Andrew

Thanks! :cheers:

The whole thing has been fun and a huge learning curve building my own chassis and making all the parts work/fit together in a way Chevy never intended! lol The nice thing is I think I'm over the hump and the first test drive is within sight!

Thanks! :thumbsup: