Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   1968 Camaro "Badmotorfinger" v2.2 (https://www.lateral-g.net/forums/showthread.php?t=28515)

Nick.V70 11-24-2010 05:32 PM

Quote:

Originally Posted by Flash68 (Post 317245)
I found this on another forum and just ordered one. Was planning to get a GoPro anyway, so I jumped on it. If anyone else is interested, here is the deal:

http://evsmotors.com/?p=741


You want to buy a GoPro?

Flash68 11-24-2010 08:01 PM

Quote:

Originally Posted by Nor-Cal Nick (Post 318345)
You want to buy a GoPro?

Just got mine yesterday!

Flash68 12-17-2010 01:14 AM

update time
 
Rich Bermea -- of Road Touring Customs in Gilroy, CA -- have been working on "Phase 2" of my Camaro with the sole purpose of getting it race and road-trip ready for RTTC II in February. Rich is a great dude and knows and loves Camaros. He just posted his own 68 Camaro build thread yesterday - "Pro Vintage." Check it out.

So.. just a few days ago I was almost set on getting the Liberty upgraded TKO 600 to replace my M-21, but after continuing to uncover bad seals and gaskets causing endless leaks on this car and motor, we decided to pull the motor and just reseal everything pretty much everywhere. So, that decision killed the tranny budget for now.

The trans, clutch, motor and most major parts look to be in pretty good condition, and I have put 500 pretty hard (ok, very hard) miles on this car since I got it 4 months ago. It came with a fair amount of paperwork, but many things are still a mystery... some we hope to uncover very soon.

We got the motor pulled today and while I'm on vacation Rich will start on tearing the motor down, inspecting and resealing/gasketing. When I get back we will finish the rear suspension, brakes, trans, and a few other small things... wait, is anything ever really small? :_paranoid

Pics from today.

I'm really diggin the red Comp Cams stud girdle.
http://i236.photobucket.com/albums/f...8/DSCF3076.jpg

My rear Willwood kit with the obligatory beverage and Red Witch guide book.
http://i236.photobucket.com/albums/f...hoto_004-2.jpg

I finally became bumperless.
http://i236.photobucket.com/albums/f...8/DSCF3093.jpg

My attempt at a Steve Rupp-esque photo. LOL
http://i236.photobucket.com/albums/f...8/DSCF3098.jpg

Vegas69 12-17-2010 07:25 AM

Slippery slope....:D

mdprovee 12-17-2010 09:06 AM

Looks good Dave,

Like the updates, leaks suck.

Looking forward to seeing you at RTTC. Should be fun.

tones2SS 12-17-2010 09:29 AM

Very cool Dave. Good to see the rear brakes and the updates on the engine.
Keep us posted.:thumbsup:

torino420 12-17-2010 01:42 PM

looks good Dave, are you still looking in to some kind of belly pan?

skatinjay27 12-17-2010 01:58 PM

yeah dave... be careful you dont wanna fall into the "while were at it" syndrome.;)

conekiller13 12-17-2010 02:30 PM

Quote:

Originally Posted by skatinjay27 (Post 322445)
yeah dave... be careful you dont wanna fall into the "while were at it" syndrome.;)

That is exactly what has kept My Chevelle off the road for eight years and has now lead Me to change directions and make it a race car.:willy:

Swain 12-17-2010 03:02 PM

Quote:

Originally Posted by Flash68 (Post 322378)
Rich Bermea -- of Road Touring Customs in Gilroy, CA -- have been working on "Phase 2" of my Camaro with the sole purpose of getting it race and road-trip ready for RTTC II in February. Rich is a great dude and knows and loves Camaros. He just posted his own 68 Camaro build thread yesterday - "Pro Vintage." Check it out.

So.. just a few days ago I was almost set on getting the Liberty upgraded TKO 600 to replace my M-21, but after continuing to uncover bad seals and gaskets causing endless leaks on this car and motor, we decided to pull the motor and just reseal everything pretty much everywhere. So, that decision killed the tranny budget for now.

The trans, clutch, motor and most major parts look to be in pretty good condition, and I have put 500 pretty hard (ok, very hard) miles on this car since I got it 4 months ago. It came with a fair amount of paperwork, but many things are still a mystery... some we hope to uncover very soon.

We got the motor pulled today and while I'm on vacation Rich will start on tearing the motor down, inspecting and resealing/gasketing. When I get back we will finish the rear suspension, brakes, trans, and a few other small things... wait, is anything ever really small? :_paranoid

Pics from today.

I'm really diggin the red Comp Cams stud girdle.
http://i236.photobucket.com/albums/f...8/DSCF3076.jpg

My rear Willwood kit with the obligatory beverage and Red Witch guide book.
http://i236.photobucket.com/albums/f...hoto_004-2.jpg

I finally became bumperless.
http://i236.photobucket.com/albums/f...8/DSCF3093.jpg

My attempt at a Steve Rupp-esque photo. LOL
http://i236.photobucket.com/albums/f...8/DSCF3098.jpg

What all do you have done to your engine is it a 350 or 383?


All times are GMT -7. The time now is 05:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net