Lateral-g Forums - Transition Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Transition Camaro (https://www.lateral-g.net/forums/showthread.php?t=41869)

Quote:

Originally Posted by MX145 (Post 496922)

Well guys. Just got back from the paint supply. No turning back now. It's supersonic blue.

bamm, there you go. black wheels too right?

I've been playing around with the firewall trying to get it straight and all the seams consistent. Here's a pic of where I started this afternoon.
[IMG]http://i1158.photobucket.com/albums/...o/null-680.jpg[/IMG]

Quote:

Originally Posted by Vince@MSperfab (Post 496982)

bamm, there you go. black wheels too right?

Hi Vince. I changed them from black to dark titanium.
Here's a pic.
http://i1158.photobucket.com/albums/.../null-15-1.jpg

Quote:

Originally Posted by WSSix (Post 496972)

I think the supersonic blue is a good choice as well. :thumbsup:

Thanks Trey!

Quote:

Originally Posted by Sonar Chief (Post 496941)

I'm not partial to a color ... I looked at the Miller 211, and if I remember correctly (which I could be wrong) you could not weld 3/16 single pass w/o flux core wire? Sound right?

It looks like the Lincoln Power Mig 180 Dual should work for me.

Didn't mean to hijack your thread :popcorn2:

The Lincoln is a sweet welder! Don't think you can go wrong there. I may have been a Lincoln owner as well but my local welding supply made me a deal on the Miller and a new bottle. I looked at a few Lincoln's and Millers before choosing the 211.

According to the Miller manual I can weld up to 3/8" with .035 wire GMAW. I'm assuming multiple passes but still using GMAW gas instead of FCAW flux core. I personally have only welded a few pieces of 3/16 to 1/4 using .030 wire GMAW single pass and it worked fine based on their settings chart. Even though the 211 is rated at 210 amps its 150@30% duty cycle. I've always stick welded bigger stuff until I recently bought the Miller.

Quote:

Originally Posted by MX145 (Post 496990)

Hi Vince. I changed them from black to dark titanium.
Here's a pic.
http://i1158.photobucket.com/albums/.../null-15-1.jpg

those look great.

Quote:

Originally Posted by MX145 (Post 496992)

Nice to know .... I was mistaken, I read the Miller 180 specs ... too small for me. Maybe the 211 is the way too go.

Those wheels look awesome:thumbsup:

Sure do like the wheels,also you have done a good job on the firewall so far

Quote:

Originally Posted by MX145 (Post 496989)

Looking great, Ryan!

X2 ! and I like the color on the wheels.