Lateral-g Forums

lol... You know, Ol Foose would have bondo'd up those hammer marks on that after straightening it back out. Jus' sayin'

And what's with all of the oil deposits? I know you don't need any corrosion protection out there. ;)

And that rod through the control arm pickup points trick, where'd you learn that from. http://www.speedinfinity.net/forums/...lt/popcorn.gif

Nice work Sieg, keep it up.

Norwood has enough bondo, thankfully it's not lead or he would be 200 lbs. heavier. :sieg:

The first two pictures were taken 5 years ago BF (before fire) after having the motor freshened up and telling the machine shop how much I hate oil leaks, new Milodon pan, timing cover, Felpro one piece silicone gasket, Right Stuff sealant, and assurance that it wouldn't............it only leaks half as much. :bang:

The rod trick came from the masochist of measurement..........I think you know the guy. :rules:

Thanks :thumbsup:

Sieg	03-22-2015 10:05 AM

Quote:

Originally Posted by GregWeld (Post 599607)

Those come from NOT running an LS motor.....

Well, I don't have any cooling issues..............I got that going for me. :mock:

Sieg	03-22-2015 10:13 AM

Quote:

Originally Posted by CURVES (Post 599614)

Did I miss something?

What happened to the other subframe?

It's leaning against the wall......waiting for social security to fund it. :D

If the subframe comes out, so does the motor and that means upgrades that don't mesh with poor Norwood's current budget limitations. :shakehead:

CURVES

03-22-2015 10:31 AM

I thought maybe you'd try the method Customworks used on Glassman's car....

But I get it :D

GregWeld

03-22-2015 10:32 AM

Quote:

Originally Posted by Sieg (Post 599616)

Well, I don't have any cooling issues..............I got that going for me. :mock:

That was an installer error -- sometimes you DO NOT get what you pay for.... LOL

GregWeld

03-22-2015 10:33 AM

Quote:

Originally Posted by CURVES (Post 599620)

I thought maybe you'd try the method Customworks used on Glassman's car....

But I get it :D

That should have been a driver re-install.

Vince@Meanstreets

03-22-2015 10:33 AM

Quote:

Originally Posted by GregWeld (Post 599621)

That was an installer error -- sometimes you DO NOT get what you pay for.... LOL

:action-smiley-027:

SSLance

03-22-2015 07:00 PM

Quote:

Originally Posted by Sieg (Post 599615)

The rod trick came from the masochist of measurement..........I think you know the guy. :rules:

lol... That the PERFECT name for him...

Sieg	03-23-2015 05:05 AM

I finished what the StarBright media couldn't yesterday with my tried and true electric drill and wire wheel.......

http://photos.smugmug.com/photos/i-P...PCJcMkP-X2.jpg

I'll treat the uppers and lowers with Ospho today since I had good results on my floorboards prior to painting with POR 15.
http://photos.smugmug.com/photos/i-r...-rsLPJ35-L.jpg

If you're not familiar with Ospho, I'd check it out. I've used the product over the last 30+ years and have been very impressed. www.ospho.com

I ordered 3 aerosol cans of POR 15 Top Coat in Chassis Black yesterday so I should have the pieces painted Tuesday night if all goes well.

All times are GMT -7. The time now is 11:30 AM.

Page 197 of 218

197

Show 40 post(s) from this thread on one page