well hello david from belguim..........great to have you on board friend.......hotwheels

Still alive...
 

and i have nearly all parts to start...:unibrow:

The wheels Salt Flat:
http://img158.imageshack.us/img158/1559/buick2jo9.jpg

The brakes from BAER:
http://img165.imageshack.us/img165/5...ebay02zea9.jpg

The Ron Davis Radiator:
http://img165.imageshack.us/img165/5324/dsc00158cp3.jpg

The front lower and upper CPP tubular arms:
http://img293.imageshack.us/img293/1332/lowerarmmg1.jpg

suite
 

The rear upper and lower Edelbrock arms:
http://img158.imageshack.us/img158/1982/edelrg6.jpg

http://img165.imageshack.us/img165/4950/edel2zo7.jpg

http://img158.imageshack.us/img158/668/edel3sg7.jpg

Quick ratio AGR power steering box:
http://img293.imageshack.us/img293/9848/edagrkr8.jpg

A GS grill found on a Buick in a scrapeyard here in Belgium (the ugly) and a nicer, bought on ebay :
http://img158.imageshack.us/img158/6908/edgsjk3.jpg

again
 

A front bumper found in UK and the rear bought on ebay (there are no repro for Buicks!):
http://img158.imageshack.us/img158/9581/1bd61ow7.jpg

http://img165.imageshack.us/img165/7...2133pjpvw3.jpg

also, Dynamat isolator, a B&M transpak kit, a gearbox radiator, an Edelbrock fuel/air ratio gauge, ....

And i just went to order a P-1SC ATI Procharger from XS Performance with a 24"x12"x3" intercooler, an Aeromotive A1000 fuel pump, a Pro Flow bypass valve, an Aeromotive boost sensitive regulator, a Holley carb modification kit.
http://img158.imageshack.us/img158/6...leuhbigov0.jpg


I will add to this:
a A-pillar pod for 2 gauges, a fuel and a boost pressure gauges, a Holley 650 carb, fuel filter.

I started to remove the old parts from the suspension to fit the new components and the brakes, in the rear i have to open the axle to install the Eaton LSD, I will place the supercharger as soon as i get it.
The car will be running before the big "restoration work"

http://img394.imageshack.us/img394/9553/dscf1139gd8.jpg
a little bit of cleaning to prepare the engine for the supercharger (trial fitting).

http://img394.imageshack.us/img394/7568/a1hy3.jpg
Out the drums and the old stock arms

http://img394.imageshack.us/img394/563/zb3zj7.jpg

Copperage
 

Wow! What a nice car! Keep at it David! She is looking good!:thumbsup:

John

Nice build up!

help
 

http://img115.imageshack.us/img115/1223/brasut7.jpg

Can someone tell me if the axle formed by the upper and lower ball joints has the right angle?
It seems that the caster is not quite good, is it normal, will it change when the car sits on his wheels?
The front of the car is on the left and the tubular arms are from CPP.
THX
David

Procharger
 

[IMG]http://img114.imageshack.us/img114/2127/prochargol8.jpg[/IMG]

[IMG]http://img114.imageshack.us/img114/8...tercoolbr5.jpg[/IMG]

Here is the whole kit i received from XS Performance, including the intercooler...

also the side mirros and front hood chrome bought on e-bay....

[IMG]http://img509.imageshack.us/img509/4894/retrosgl6.jpg[/IMG]

[IMG]http://img114.imageshack.us/img114/2397/b8f41dy0.jpg[/IMG]