Lateral-g Forums - Dse Stands

Page 2 of 6

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Dse Stands (https://www.lateral-g.net/forums/showthread.php?t=15723)

Moose

10-24-2008 06:47 AM

building mine this weekend so putting this back up top.

Z06Joe

10-24-2008 07:00 AM

Thanks Moose looking forward to getting them built and trying them out when doing the headers on my car!!

Vegas69

10-24-2008 07:35 AM

Quote:

Originally Posted by brownz (Post 158087)

I got all four made today and was not bad at all in cost the wood was 26 and change but i had left over lowes gift cards that was 7 bucks so it was only $19 and the nails were free from my dads work WOOT WOOT. I only have the ones under the front as the rear tires are not on due to harware issues. but all in all not a bad deal for something that you can use on any thing with wheels. and I did go 12'' by 12'' on all fours FYI
http://i224.photobucket.com/albums/d...z/100_0301.jpg

Looks good but I would spread them out just a little more. I'd be nervous under that car.

Spiffav8

10-24-2008 01:42 PM

I agree with Todd...those look a little tight. Kind of a safety concern in my book.

On another note...those wheels are awesome and I love seeing the brakes popping out.:thumbsup:

G-Body

10-24-2008 02:39 PM

Built mine 16"s wide for my wider rear tires and they feel really safe aswell, these stands are like a self smack in the head going why didnt i think of that not big on copying anything but these are way to nice and make the job way easier and safer to work on!
Used screws in mine long enough to go through both boards and one in each corner!
Another good use if you noticed they "DSE' put them on there sides and put jack stands on them to support bodies etc!
Its not by accident that DSE is where there at with the quality in there cars its little things like even these stands that is the attention too detail and the pride that goes into eveything they build. You'll find all the great builders be it shops or individuals if they are a very detail oriented person it shows in there cars aswell!

http://i229.photobucket.com/albums/e...ntheair008.jpg
http://i229.photobucket.com/albums/e...ntheair019.jpg

Stuart Adams

10-24-2008 03:46 PM

Cool car.

brownz

10-24-2008 04:03 PM

Quote:

Originally Posted by Spiffav8 (Post 173188)

I agree with Todd...those look a little tight. Kind of a safety concern in my book.

On another note...those wheels are awesome and I love seeing the brakes popping out.:thumbsup:

I understand what you are saying but they are built just like to ones dse uses.

http://i224.photobucket.com/albums/d...alejr-412L.jpg

Vegas69

10-24-2008 08:26 PM

Doesn't mean it's right. Simply stating a few more inches would make sure the car would never have a chance of rolling off. My biggest concern would be during jacking.

skatinjay27

10-24-2008 09:11 PM

hahaha what the hell make them "DSE"s idea??? a freaking wood stand is not something you consider a issue of copying anyways...
if you think dse was the first shop/person to think of this you seriously got to be off your rocker.
but i do agree brandon, it looks a little scary, looks much sturdyer like g-bodys 16"

Spiffav8

10-24-2008 09:46 PM

I went to the DSE site and your stands look to be the same size. I still think they look (even the DSE ones) a bit small. Cool though.

How about some more pictures of your car. :)

All times are GMT -7. The time now is 06:47 PM.

Page 2 of 6

Last »

Show 40 post(s) from this thread on one page