Lateral-g Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   LS coil relocation brackets (https://www.lateral-g.net/forums/showthread.php?t=16073)

XcYZ 08-13-2008 05:19 AM
Quote:
Originally Posted by Jamess113 (Post 161182)
How about these.
I like that idea, Jay.

tones2SS 08-13-2008 05:32 AM
Quote:
Originally Posted by slownova (Post 161155)
what coils are those? making any for stock LS1 coils?
I do believe a company named abear motorsports makes them for the LS1.

Garage Dog 65 08-13-2008 09:51 AM
Quote:
Originally Posted by reboot04 (Post 161146)

The Katech mounts are great pieces but don't mount that way at all. They relocate the coils further inboard not outboard. They require Katech's valve covers (which are also great pieces) and new plug wires that are included in the kit.
They are mounted outboard on the pratt/miller car right over the exhaust - must be a custom bracket and not a Katech manf unit. Thx

Garage Dog 65 08-13-2008 06:38 PM
1 Attachment(s)
The article is in GM High-Tech Performance - Sept issue - on page 40-42.

http://www.gmhightechperformance.com...6rs/index.html

Says the motors for the Pratt&Miller C6R/S cars are built for them from Katech. It shows the outboard coil mounts - sorta looks like Tyler's too. Might be using the header studs for the "C" mounts. I'll check some more and see if I can find additional info. Jim

Pics

http://www.gmhightechperformance.com.../photo_03.html

http://www.gmhightechperformance.com.../photo_05.html

Van B 08-13-2008 08:07 PM
Quote:
Originally Posted by Jamess113 (Post 161182)
How about these. I could probably have these made and sell them for around $350.00 if anyone interested.
Not bad.

WILWAXU 08-13-2008 08:16 PM
Quote:
Originally Posted by Jamess113 (Post 161182)
How about these. I could probably have these made and sell them for around $350.00 if anyone interested.
I bet you could sell a few of them. Nice setup!

Bowtieracing 08-14-2008 05:39 AM
Quote:
Originally Posted by Garage Dog 65 (Post 161295)
The article is in GM High-Tech Performance - Sept issue - on page 40-42.

http://www.gmhightechperformance.com...6rs/index.html
I liked the article so much at i just had to place 2 years subscription:D

Teetoe_Jones 11-24-2008 03:41 PM
Bringing up an old one.

http://i37.tinypic.com/dfwydj.jpg
http://i38.tinypic.com/206ll5i.jpg

Finally done. Pricing will be $300 plus shipping. These are for the LS2 and LS7 type coils only. Will not work with the truck coil, aftermarket MSD versions, or the LS1/LS6 type coils.

Tyler

youthpastor 11-24-2008 04:29 PM
nice work ...these will be on the next project:D :D

camaro2nv 11-24-2008 05:42 PM
Ill have to add these to my list.


All times are GMT -7. The time now is 11:45 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net