Lateral-g Forums - Pro Rides/RPM Vette

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Member/Project/Vehicle Introductions (https://www.lateral-g.net/forums/forumdisplay.php?f=33)

- - Pro Rides/RPM Vette (https://www.lateral-g.net/forums/showthread.php?t=16970)

XcYZ	10-20-2008 05:35 AM

Very cool car.

Pro Rides

10-20-2008 10:56 AM

Its a Franklin quickchange with C4 spindles on the outsides. Let me know if that helps you out.

E.rodz

01-08-2009 06:59 PM

nice job you guys have inspired me for a few years now.since the starliner.love the chassis.attention to detail is my game too. thanks for the inspiration.:thumbsup:

ironworks

01-09-2009 07:47 AM

Who built the frame, it looks pretty slick

WSSix

01-09-2009 05:04 PM

looks like an SRIII frame http://sriiimotorsports.com/

claytonisbob

01-09-2009 06:49 PM

I am usually not a fan of convertables, but damn... that is one nice vette.

SLO 65

01-09-2009 07:18 PM

Corvette Frame

Todd Jupitor originally commissioned this car back in the early 90's. Adams' Rod Shop (ARS) in West Palm Beach originally built it. It was 2 tone blue and purple back then. The Hot Rod magazine article says the chassis was developed for '33-'34 Fords but was adapted to fit this application. This was the car that "did it" for me back in the day.

Nick

All times are GMT -7. The time now is 05:07 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page