Lateral-g Forums - Need Compounding/Buffing Advice

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)

- - Need Compounding/Buffing Advice (https://www.lateral-g.net/forums/showthread.php?t=17176)

camaro2nv

10-31-2008 02:58 PM

Quote:

Originally Posted by DOOM (Post 173639)

Lose the DA !!!!!!! I use to allow this in my shop ''ITS FASTER'' but it takes that much longer to buff the DA cuts ... Just do it by hand you will be much happier with the results....
Mario

I agree, 800,1200,1500,2000 block then perfect it 3000 compound, then perfect glaze.

rwhite692

11-02-2008 07:34 PM

Quote:

Originally Posted by DOOM (Post 173639)

Lose the DA !!!!!!!

X2...for all the reasons already mentioned

2Bad4Ya

11-03-2008 11:20 AM

Switched to a yellow wool pad, and color sanding scratches are no more. The white waffle radiused pad from 3-m was not cutting down enuff even after 3 whole passes. 1 pass at around 1800rpm nice and slow and it was resolved.

However now that it has sat a week I think I will wait another week or so and see how she looks after the paint has had some time to shrink, etc... and re-evaluate if it needs another sand/cut/polish pass. I am thinking it will need more attention and if so will do it by hand this pass.

Thanx guys

All times are GMT -7. The time now is 02:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page