Chris I like the top wheel, but wouldn't do full polish. I see the center section darker or machine finish.

I think you should go with the G cubes.






I'm a little biased.

http://i73.photobucket.com/albums/i2...DSC_0030-1.jpg

X2 Rushforth wheels

Do you have a larger version of that picture?????

What size tires do you have there?

The tires are 295/35/18 in the rear and 235/40/18 in the front. I'll work on a bigger picture.

Looks good! Like to see more pics too.:thumbsup:

Here are some pics. I will post some after I lower next week.

http://i73.photobucket.com/albums/i2...c/DSC_0028.jpg

http://i73.photobucket.com/albums/i2...c/DSC_0030.jpg

Okay guys...still hunting. Still like the G cube...but am now looking at other options. So...what do you think of these? Either set will cost me about $3,800 shipped with tires. These are much more than the Intro...but a whole other look too. Here is the lat-g link to the car.


https://lateral-g.net/members/mcdonald69camaro/

https://lateral-g.net/members/mcd...9camaro/02.jpg

https://lateral-g.net/members/mcd...9camaro/04.jpg

I think the black center would look Billy Bad Butt on this...while the silver center would be neat and clean. The car needs a new attitude that it just isn't getting with the C5 wheels.

https://www.newstalgiawheel.com/imag...W_1414_500.gif

https://www.newstalgiawheel.com/imag...W_1422_500.gif

I like these two choice's better.

Thanks man...

does anybody know the exact maximum size and offset you can stuff in there on a stock suspension?

I get a little rub in the rear under hard turning or hitting bumps when I have the rear seat full of people - not enough to be an issue with the stock rear 18" C5 wheels

The front rub when I turn at a decent speed, or if I go into a drive or some sort of bump up. I assume 7" rim in the front with a 235 40 18 might stop that...but in the rear I would like to keep it maxed.

I'm going back to a stock width rear axle - would like to go 10 x 19 on the rim...and am curious about back spacing.