Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)
-   -   1st Gen Camaro body questions (https://www.lateral-g.net/forums/showthread.php?t=17385)

comp-spec 11-10-2008 09:00 PM
Quote:
Originally Posted by Musclerodz (Post 175881)
I don't know. A welded in sub would be a requirement. Might as well weld the fenders to the car. What Pete did is what I would do.
That is how ours are, fenders are welded right to the body

Payton King 11-12-2008 09:19 AM
I did that to my car 12 years ago
 
and never had problems with cracks. I like the look, but when I re-did my car I did not do it again. If you are running a stock a/c and need to replace the blower motor...what a bitch.

Also if you ever have any mishap it becomes a full blown project instead of a small remove and replace.

Show car is cool. Driver...not so much

NRV2L8 01-11-2009 05:53 AM
Quote:
Originally Posted by Payton King (Post 176225)
and never had problems with cracks. I like the look, but when I re-did my car I did not do it again. If you are running a stock a/c and need to replace the blower motor...what a bitch.

Also if you ever have any mishap it becomes a full blown project instead of a small remove and replace.

Show car is cool. Driver...not so much
I couldn't agree more.
If EVER !!! you need to perform any detailed work in the Engine Bay or Heaven Forbid, it's hit in the front area?..... Forget About It


All times are GMT -5. The time now is 07:06 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net