Lateral-g Forums - Rpm's 69 Bird(the Old Prorides Gang)

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Rpm's 69 Bird(the Old Prorides Gang) (https://www.lateral-g.net/forums/showthread.php?t=20807)

The front end is a modified Fatman that has shockwaves on it. The rearend is Detroit Speeds Quadra Link with a shockwaves on it modified by a c in the rear rails and moving the floor around to make it all work while still getting the exhaust all the way out the back. The floors thru out the car have been moved and reworked to make nothing hang below the rockers the car will roll all the way down. Plus the floors are flat in the car and the seats mount super low in the car. There are jack bolt bungs weld in square tubing along the rockers for future service work and ease of jacking it up down the road. We added an 1 1/4 to the rockers also' Wheels & Tires are CHICAYNES from Billet Specialties but they have ARP bolts machined into them and they are 19s front and 20 rears, we then powdered the centers bronze along with backsides and then powdered the ARP bolts and valve stems black. The nose has a boat load of time in it and we did it 3 times till we liked it we also removed the old nasty impact rubber along the headlight buckets too. Thanks again guys

Do you think You could get me a measurement off that car?

I need the heights of the fender lips on the axle center line. Just the lowest point on each fender lip at the axle center line.

Car looks really sleek. Plus Firebirds are kind of growing on me lately. :thumbsup:

looks killer Curt !
I saw build pics a while back and was waiting to see it finished.
The nose it absolutly perfect !
Good luck in Columbus.... make us East Coast Builders proud !

On the measurements do you mean from the fender lip along the top of the of the wheel opening to the center of the wheel or from the rocker up to the center.
Thanks man we can't wait for Columbus.

Nice looking car:thumbsup:

The owner is the guy who just bought my car, very cool guy and loves the sport-

The convert looks amazing, nice job guys- Chris

:faint: :wow: :hail: :bow: :cheers:

Quote:

Originally Posted by RPM HOTRODS (Post 213834)

On the measurements do you mean from the fender lip along the top of the of the wheel opening to the center of the wheel or from the rocker up to the center.
Thanks man we can't wait for Columbus.

Just from the ground to the fender lip at the axle center line. Shold be some where 20-22 in the front and similar in the rear.

Can't wait to check it out at Columbus.

Thanks

Rodger